Configured Password Authentication But Password Authentication Page Does Not Prompt Out

|
  • 109
  • 7

Issue Description

The password authentication is configured on the IAM but found that the authentication page cannot be prompt out.

Handling Process

  • In bridge mode, the testing IP is not shown on the online user list in the IAM, and the authentication policy is password authentication.
  • Try to access web page www.qq.com, no redirection to the authentication page, instead directly show this site cannot be reached.
  • Manually enter the bridge address and virtual address, both address can be redirected to the authentication page.
  • Check the redirection configuration and found the configuration as follows:


Root Cause

The DMZ port is not used by the device for communication. After ticking the DMZ port redirection will cause the redirection packet to be sent from the DMZ port, but the DMZ port is not enabled, so the authentication page cannot be redirected.

Solution

Bridge mode, in normal circumstances, you can uncheck the two options under the redirection option, by using the virtual address to redirect, the authentication page can be prompted out.
Aries Lv3Posted 11 Mar 2020 18:49
  
best documentation
Johannes Lv4Posted 18 Mar 2020 19:07
  
very thanks bro
Faisal Posted 13 Aug 2020 07:40
  
Thank you very much for the information ...
Faisal Posted 31 Oct 2020 09:37
  
Nice article ...
Faisal Posted 08 Dec 2020 07:30
  
Great Info
Faisal Posted 11 Mar 2021 09:53
  
Very informative …
Faisal Posted 27 May 2021 14:19
  
Nice guidance ...

I want to write a case
Doc ID: 2640
Author: Newbie280530
Updated: 2019-12-24 11:46
Version: