Sangfor Community»Categories Products Network Secure (NGAF) Ping Error On Physical Interface

Ping Error On Physical Interface

views: 7826 | comments: 17 | added to Favorites 0
Lights on | 提示:支持键盘翻页<-左 右->
    组图打开中,请稍候......
Created: 16 Mar 2023 20:51

Summary:

Hi All. I need help. I have received PING ERROR on my NGAF5400 at eth5. Currently the eth5 port is set for my backup internet line. Since the error is there, I cannot switch my main internet line to t ...

Reply

CTI_JianJie Posted 10 Apr 2023 11:27
Check what the link state detection setting is, if the connection work when plug into the PC, try to ping in the PC if the IP address defined in the link state detection could be ping or not.

1.png (35.68 KB, Downloads: 834)

1.png
Faisal Piliang Posted 21 Mar 2023 14:04
IP address is configured. Dial-up status: When Link Mode: operating mode of the network interface, such as auto-negotiation.
Natsu Dragneel Posted 20 Mar 2023 17:14
Get support on tech team
BitCloud Posted 20 Mar 2023 17:10
Check the network and the subnet mask
isabelita Posted 20 Mar 2023 17:04
The network has the biggest share on the problem
Farina Ahmed Posted 20 Mar 2023 16:04
If it was working correctly previously (like ping was done correctly previously) then check with the cable or port. Sometimes we check higher issues where as their is a minor problem in the physical ethernet cable or port might be shutdown or got faulty.
Jhazz Posted 20 Mar 2023 15:51
Did you check the default settings of the IP and subnet mask?
Adonis001 Posted 20 Mar 2023 15:27
you may want to try swapping out the network cable
rivsy Posted 20 Mar 2023 14:59
Check the subnet mask if same to the primary and backup
faysalji Posted 20 Mar 2023 14:05
Last edited by faysalji 20 Mar 2023 15:12.

Check the settings for eth5, including the IP address, subnet mask, default gateway, and DNS servers, to ensure that they are correct and match the configuration of your backup internet connection.

If the settings appear to be correct, you may want to try swapping out the network cable or testing the connection with a different device to see if the issue is related to a physical problem with the port.