Sangfor Community»Categories Products Network Secure (NGAF) Not all types of interfaces shown

Not all types of interfaces shown

views: 6274 | comments: 21 | added to Favorites 0
Lights on | 提示:支持键盘翻页<-左 右->
    组图打开中,请稍候......
Created: 05 Dec 2022 21:42

Summary:

Hi all! There's only 3 types of interfaces (Layer 3, Layer 2 and Virtual Wire) on my vNGAF 8.0.47 but i need Mirror mode. Is it possible to set up mirror interface on virtual NGAF?

Reply

Bebe_Bote Posted 15 Dec 2022 00:47
vNGAF is not supported.
Kalem Posted 15 Dec 2022 00:37
virtual NGAF is not supported.
Zonger Posted 13 Dec 2022 17:36
physical appliance is required to use the mirroring mode
arjay Posted 13 Dec 2022 12:51
Yes you can mirror it just select "Mirror" in the "Route" then fill up the rest of the tab
Faisal P Posted 13 Dec 2022 12:06
Yes, it is. Choose Network > Interface > Virtual Wire to add a virtual wire. Step 5: Configure switchover for the switches and routers on the intranet.
Noman Rajput Posted 12 Dec 2022 18:45
Mirror mode can be configured in appliance based NGAF only.
Farina Ahmed Posted 12 Dec 2022 15:01
First set it to mirror mode and then set the mirror interface.
Mikee Posted 12 Dec 2022 10:42
The virtual appliance does not support mirrors because of the port on the server.
KarenD Posted 12 Dec 2022 10:40
Due to the server's port, the virtual appliance does not support mirrors.
Noah19 Posted 12 Dec 2022 10:39
Mirror is not supported in Virtual appliance because of Port of the server
Happpy Posted 12 Dec 2022 09:59
Virtual NGAF is not supported