Sangfor Community»Categories Products Network Secure (NGAF) Multiple WAN on NGAF

Multiple WAN on NGAF

views: 2635 | comments: 7 | added to Favorites 0
Lights on | 提示:支持键盘翻页<-左 右->
    组图打开中,请稍候......
Created: 24 May 2022 18:13

Summary:

Hi, I have firewall m5100. This model have 3 physical interfaces. I need to connect 3 different WAN and 1 LAN. How can I do? I try to configure the wan uplinks with different subinterfaces with VLAN. ...

Reply

jetjetd Posted 08 Jun 2022 18:44
Of this 3 different WAN sources, is this came up with 3 provider or this is only from one provider? If one provider only you can use 1 physical link and use the other 2 for subinterface under that interface. The LAN must use a dedicated physical link by the way.
Farrukh Khatib Posted 07 Jun 2022 17:44
Yes you can make it but for that you need to bring multiple wan connection over the VLAN and create the sub interface of the physical interface and logically segregate it into 2 VLAN. with this senario you can accomodate multiwan concept.

ArsalanAli Posted 04 Jun 2022 18:24
Did your issue get resolved ?
kmrnliaqat Posted 01 Jun 2022 18:23
informative ..
ArsalanAli Posted 27 May 2022 21:50
Is IPv6 is enable ?
go in system -> network then scroll down and enable IPV6

KY Posted 27 May 2022 10:22
"I try to configure the wan uplinks with different subinterfaces with VLAN. But on the menu "subinterfaces" there isn't the flag WAN attributes."
You can go to the corresponding physical interface that is used by the subinterface and enable the WAN attribute on the physical interface.
For more information about deployment, can go to our community resources to get the configuration guide:
https://community.sangfor.com/plugin.php?id=sangfor_databases:index#?tags=7