Sangfor Community»Categories Products Network Secure (NGAF) SSL VPN can route internet to Sangfor NSF

SSL VPN can route internet to Sangfor NSF

views: 379 | comments: 9 | added to Favorites 0
Lights on | 提示:支持键盘翻页<-左 右->
    组图打开中,请稍候......
Created: 12 Oct 2024 20:11

Summary:

Hi may i know Sangfor NSF or NGAF, for SSL VPN : we can do some route the user sslvpn force to internet at Sangfor NSF / NGAF, meaning to say want to force internet through the easy connect when i ...

Reply

Helmi Salim Posted 15 Oct 2024 19:52
I just got feedback from Sangfor support that NSF/NGAF does not support SSL VPN in full tunnel mode
Farina Ahmed Posted 14 Oct 2024 14:26
Sangfor NGAF and NSF both support routing SSL VPN traffic through the device, allowing you to force SSL VPN users to access the internet via the Sangfor firewall when using Easy Connect. This is typically done by enabling "Split Tunneling" or configuring routing policies that direct all internet-bound traffic through the NGAF/NSF, ensuring the traffic is inspected and secured before reaching the internet. You can customize these settings in the VPN configuration to meet security requirements.
Enrico Vanzetto Posted 13 Oct 2024 20:08
hi, please take a look on my guide (replace xx with tt to make link clickable): hxxps://community.sangfor.com/forum.php?mod=viewthread&tid=10122
Sheikh_Shani Posted 13 Oct 2024 13:27
Hello Dear

when Easy Connect is turned on, you may set up an SSL VPN to transport user traffic over the internet using Sangfor NSF or NGAF. By maintaining a secure connection to the corporate network on public networks, this configuration guarantees secure tunneling of all traffic.
Joudrey Posted 13 Oct 2024 00:03
Hi Sir,

Static route point from virtual IP address at ssl vpn config?
Enrico Vanzetto Posted 13 Oct 2024 00:03
Also, It's recommended to control the traffic of the VPN users by defining some rules on application control
Enrico Vanzetto Posted 12 Oct 2024 23:57
Hi,after vpn ssl configuration,you have to define a static route for allow the VPN client traffic to reach internet.
Joudrey Posted 12 Oct 2024 20:30
Hi sir
for this line "configure SSL VPN to route user traffic through the internet" this one refer on application control or Nat or static route?
Enrico Vanzetto Posted 12 Oct 2024 20:19
Hi, using Sangfor NSF or NGAF, you can configure SSL VPN to route user traffic through the internet when Easy Connect is activated. This setup ensures secure tunneling of all traffic, maintaining a secure connection to the corporate network on public networks.