Install Sangfor Endpoint Secure Agent in VMWare ESXi

Newbie786577 Lv1Posted 07 Dec 2023 10:26

May I know how to install Sangfor Endpoint Secure Agent in VMWare ESXi and manage them under Platform-X?

By solving this question, you may help 249 user(s).

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Newbie517762 Lv5Posted 07 Dec 2023 11:44
  
HiHi,

Please find the link below to download the OVA installation package:

Additionally, please find the attached file for the OVA installation guide:
OVA installation.pdf (281.28 KB, Downloads: 475)

I hope this information proves helpful.
Farina Ahmed Lv5Posted 12 Dec 2023 15:05
  
To install Sangfor Endpoint Secure Agent on VMWare ESXi and manage it under Platform-X, begin by downloading the appropriate agent package from Sangfor's official website. Next, access your VMWare ESXi console and create a new virtual machine (VM) or select an existing VM where you intend to install the agent. Install the operating system compatible with the Sangfor Endpoint Secure Agent within the VM. Once the OS is set up, download and install the agent within the VM according to the provided instructions. After successful installation, ensure that the VM has network connectivity and is visible within your Platform-X management interface. From there, you can configure and manage the Sangfor Endpoint Secure Agent settings, policies, and security measures through Platform-X's centralized management platform.
Enrico Vanzetto Lv4Posted 12 Dec 2023 23:26
  
Hi, about deploying sase on your ESXi, you can download OVA or ISO here:

•        OVA  https://download.sangfor.com/dow ... .7.12R2/EDR3.7.12EN(20230927).ova
•        ISO  https://download.sangfor.com/dow ... .7.12R2/EDR3.7.12EN(20230927).iso

About vm sizing, you have to assign these settings: (8CPU+16GB RAM+250GB - disk space but for production environment you have to assign more space because it depends on the number of managed endpoints)

Imran Tahir Lv4Posted 13 Dec 2023 00:44
  
Download the owa file or iso and install it on VM with admin right
mdamores Lv3Posted 13 Dec 2023 09:04
  
In order to install Sangfor Endpoint Secure Agent on VMWare ESXi to be managed by Platform-X you may try the below:
- download your preferred agent package thru Sangfor website
- access your VMWare ESXi management console
- to install the agent, you need to create a new VM or select from your existing VMs
- install your preferred OS on the selected VM
- after the OS installation, you may now proceed with the installation of the Agent to the selected VM
- connect your VM to your network
- configure the Sangfor Endpoint Agent settings, policies, and other settings  through Platform-X management platform

for the Installation in OVA Image Mode, please see steps below
1. Import the OVA templatefrom the local environment
2. Configure the network. You can configure the network on the web portal in the 3.2.22EN or a later version
(full installation).
     - Log in to the Manager.
     - Configure the PC IP address in the same network segment as the managementp ort of the Manager. Open the browser, enter the default Manager address https://10.251.251.251 in the address box, and press Enter. Log in to the Manager. The default user name and password are admin and admin, respectively. The default IP address of the Manager management port is 10.251.251.251/24. Internet Explorer 11 or later, Firefox, and Google Chrome are supported.
   - Configure the Manager's IP address. Choose System > System > Network, click the Interfaces tab, and set IP Address
   - Configure DNS addresses. Choose System > System > Network, click the Advanced tab, and set Preferred DNS and Alternate DNS. The DNS addresses must be configured because domain names need to be parsed when the Manager updates the antivirus database. Configure routes. Choose System > System > Network, click the Routing tab, and configure routes. Routes must be configured for the Manager to connect to and communicate with endpoints.
3. Verify that the Manager installation is successful.
   - Log in to the Manager (default address: https://10.251.251.251, default user name and password: admin and admin) and check whether the version number on the home page is correct. If the version
number is correct, the installation is successful.
MTR Lv2Posted 15 Dec 2023 18:24
  
To install Sangfor Endpoint Secure Agent in VMWare ESXi and manage them under Platform-X, you can follow these steps:

Installation of Sangfor Endpoint Secure Agent in VMWare ESXi:
   First, ensure that you have the necessary installation files and credentials.
   Access your VMWare ESXi environment and log in to the ESXi host.
   Upload the Sangfor Endpoint Secure Agent installation package to the ESXi host.
   Open the ESXi host console or connect to it using a remote management tool.
   Navigate to the location where you uploaded the installation package.
   Run the installation package and follow the on-screen instructions to complete the installation process.
   Make sure to configure any required settings during the installation, such as network connectivity and communication with the Platform-X management server.

Management of Sangfor Endpoint Secure Agent under Platform-X:
   Access the Platform-X management interface using a web browser.
   Log in to the Platform-X management console using your credentials.
   Navigate to the section or menu related to endpoint management or security.
   Look for options to add or register new endpoints.
   Follow the provided instructions to add the Sangfor Endpoint Secure Agents installed on your VMWare ESXi hosts.
   Provide the necessary information, such as the IP address or hostname of the ESXi host and the credentials for accessing the Endpoint Secure Agents.
   Once the agents are added and registered, you should be able to manage them through the Platform-X management console.
   Use the available features and settings in the console to monitor, configure, and perform security operations on the managed Sangfor Endpoint Secure Agents.

Please note that the specific steps may vary depending on the version of Sangfor Endpoint Secure, VMWare ESXi, and Platform-X you are using.
Newbie259853 Lv1Posted 15 Dec 2023 18:36
  
To install Sangfor Endpoint Secure Agent on VMWare ESXi and manage them under Platform-X, you should generally follow these steps:

Install SES Agent on VMWare ESXi:
Download the SES Agent:

Obtain the SES Agent installer from Sangfor's official website or contact their support.
Prepare the VMWare ESXi Host:

Ensure that your VMWare ESXi host meets the system requirements for SES Agent.
Access the ESXi Host:

Use vSphere Client or other means to access your ESXi host.
Upload SES Agent to ESXi:

Upload the SES Agent installer to the ESXi host using the vSphere Client.
Install SES Agent:

Connect to the ESXi host via SSH or use the console.
Navigate to the directory where you uploaded the SES Agent installer.
Run the installer, following the provided documentation or installation guide.
Manage SES Agents under Platform-X:
Access Platform-X:

Log in to the Sangfor Platform-X management console.
Discover or Add ESXi Host:

Navigate to the section for managing virtualized environments.
Discover or add your VMWare ESXi host to the Platform-X console.
Install SES Management Components:

Follow the Platform-X documentation to install SES management components. This may include the SES Manager.
Configure SES Policies:

Set up security policies, rules, and configurations for SES to manage endpoints effectively.
Deploy SES Agents:

Use Platform-X to deploy SES Agents to the managed VMs on the ESXi host.
Monitor and Manage:

Utilize the monitoring and management features of Platform-X to oversee the security status of endpoints and respond to any threats.

I Can Help:

Change

Moderator on This Board

3
10
3

Started Topics

Followers

Follow

43
2
2

Started Topics

Followers

Follow

1
2
5

Started Topics

Followers

Follow

7
11
4

Started Topics

Followers

Follow

18
8
0

Started Topics

Followers

Follow

Trending Topics

Board Leaders