Natsu Dragneel Lv3Posted 05 Jun 2023 10:29
  
Check the user guide or documentation for instructions on how to reset the password or gain access to the CLI through alternative means, such as a password recovery process.
VanFlyheights Lv3Posted 05 Jun 2023 10:31
  
If the above steps do not resolve the issue, it's recommended to reach out to the official support channels for Endpoint Secure and Central Manager.
NeTSec Lv3Posted 05 Jun 2023 10:33
  
The product vendor or manufacturer should be able to provide more specific guidance and assistance tailored to your situation.
Noah19 Lv3Posted 05 Jun 2023 10:36
  
Remember to provide them with relevant details such as the specific version of the software, the error messages encountered
Saimon Lv2Posted 05 Jun 2023 10:38
  
Pay attention to any case sensitivity or special characters that may be required.
Saimon Lv2Posted 05 Jun 2023 10:39
  
Take note of any error messages or warnings that show when attempting to log in. These can give useful information about the problem at hand.
Farina Ahmed Lv5Posted 05 Jun 2023 13:42
  
Verify credentials: Double-check the default username and password mentioned in the User Guide. Ensure you are using the correct credentials to access the CLI.

Check for typos: Ensure that there are no typing errors or extra spaces when entering the username and password. It's recommended to copy and paste the credentials to avoid any mistakes.

Reset default credentials: If the default credentials are not working, it's possible that they were changed during the installation process or by someone else. In such cases, you may need to reset the default credentials. Refer to the Sangfor documentation or user guide for instructions on how to reset the credentials or recover access to the CLI.

Contact Sangfor support: If you have followed the above steps and still cannot log in to the CLI, it's best to reach out to Sangfor support for further assistance. They will be able to provide specific guidance and help you troubleshoot the login issue.
Imran Tahir Lv4Posted 07 Jun 2023 12:48
  
CLI does not have the same password as GUI have
Zonger Lv5Posted 07 Jun 2023 17:36
  
If you are unable to log in to the CLI of Sangfor Endpoint Secure or Central Manager using the default credentials mentioned in the User Guide, there are a few troubleshooting steps you can try:
  • Verify the default credentials: Double-check the username and password mentioned in the User Guide to ensure you are using the correct credentials. Pay attention to any capitalization or special characters.
  • Reset the password: If the default credentials are not working, you may need to reset the password. This can typically be done through the management interface or web portal of the Endpoint Secure or Central Manager. Look for a "Forgot Password" or "Password Reset" option and follow the instructions provided.
  • Contact Sangfor support: If you have exhausted all options and still cannot log in, it is recommended to reach out to Sangfor support for further assistance. They can provide guidance specific to your environment and help troubleshoot the login issue.

MTR Lv2Posted 09 Jun 2023 21:41
  

If you are unable to log in to the CLI of your Sangfor Endpoint Secure or Central Manager using the default credentials mentioned in the User Guide, there are a few steps you can take to troubleshoot the issue:

Check default credentials: Ensure that you are using the correct default credentials as mentioned in the User Guide. Double-check the username and password to make sure they are entered correctly. Pay attention to uppercase and lowercase letters as the credentials may be case-sensitive.

Reset default credentials: If the default credentials are not working, it's possible that they were changed during the installation process or by someone else. In such cases, you can try resetting the credentials. To do this, you'll need to access the VM console or SSH into the VM. Once logged in, there may be a command or utility provided by Sangfor to reset the default credentials. Consult the documentation or reach out to Sangfor support for specific instructions on how to reset the credentials for Endpoint Secure or Central Manager.

Contact Sangfor support: If the above steps do not resolve the issue, it is recommended to contact Sangfor support for further assistance. They will have access to more detailed information about the specific software version, deployment, and troubleshooting steps. Provide them with as much information as possible about your installation and the steps you've already taken to troubleshoot the login issue. They should be able to guide you through the process and help you regain access to the CLI.

I Can Help:

Change

Moderator on This Board

3
8
3

Started Topics

Followers

Follow

43
2
2

Started Topics

Followers

Follow

1
1
5

Started Topics

Followers

Follow

7
11
4

Started Topics

Followers

Follow

18
8
0

Started Topics

Followers

Follow

Trending Topics

Board Leaders