External ISCSI Storage Access with HCI

Rashid Raouf Lv1Posted 18 Mar 2023 11:31

How to attach external iSCSI storage with Sangfor HCI

SassyScorpio has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Attaching external iSCSI storage with Sangfor HCI involves several steps:

Prepare the iSCSI storage device: Make sure that the iSCSI storage device is properly configured and connected to the network.

Configure the Sangfor HCI system: Open the Sangfor HCI management console and navigate to the storage configuration section. Select the iSCSI storage option and provide the necessary details, including the iSCSI target name, IP address, and authentication credentials.

Verify the connection: Once the Sangfor HCI system is configured to connect to the iSCSI storage device, verify that the connection is working properly. You can do this by checking the status of the iSCSI storage device in the Sangfor HCI management console.

Configure storage pools: After the iSCSI storage device is connected to Sangfor HCI, you can create storage pools and allocate storage resources as needed.

Configure virtual machines: Finally, you can configure virtual machines to use the storage resources provided by the iSCSI storage device. This can be done by selecting the iSCSI storage option when creating virtual machines or by modifying the settings of existing virtual machines.

It is important to note that the exact steps involved in attaching external iSCSI storage with Sangfor HCI may vary depending on the specific configuration of your system and the iSCSI storage device being used. Consult the documentation provided by Sangfor HCI and the iSCSI storage device manufacturer for detailed instructions.
Is this answer helpful?
SassyScorpio Lv2Posted 18 Mar 2023 17:44
  
Attaching external iSCSI storage with Sangfor HCI involves several steps:

Prepare the iSCSI storage device: Make sure that the iSCSI storage device is properly configured and connected to the network.

Configure the Sangfor HCI system: Open the Sangfor HCI management console and navigate to the storage configuration section. Select the iSCSI storage option and provide the necessary details, including the iSCSI target name, IP address, and authentication credentials.

Verify the connection: Once the Sangfor HCI system is configured to connect to the iSCSI storage device, verify that the connection is working properly. You can do this by checking the status of the iSCSI storage device in the Sangfor HCI management console.

Configure storage pools: After the iSCSI storage device is connected to Sangfor HCI, you can create storage pools and allocate storage resources as needed.

Configure virtual machines: Finally, you can configure virtual machines to use the storage resources provided by the iSCSI storage device. This can be done by selecting the iSCSI storage option when creating virtual machines or by modifying the settings of existing virtual machines.

It is important to note that the exact steps involved in attaching external iSCSI storage with Sangfor HCI may vary depending on the specific configuration of your system and the iSCSI storage device being used. Consult the documentation provided by Sangfor HCI and the iSCSI storage device manufacturer for detailed instructions.
RegiBoy Lv5Posted 20 Mar 2023 11:56
  
This involves many steps and it must be prepared properly
Imran Tahir Lv4Posted 20 Mar 2023 12:04
  
check proper docmentation
Naomi Lv3Posted 20 Mar 2023 13:12
  
contact support immediately
MISMIS Lv3Posted 20 Mar 2023 13:40
  
Please contact sangfor support team
faysalji Lv3Posted 20 Mar 2023 14:06
  
Last edited by faysalji 20 Mar 2023 15:12.

Prepare the iSCSI storage device:
Make sure that the iSCSI storage device is properly configured and connected to the network.

Configure the Sangfor HCI system:
Open the Sangfor HCI management console and navigate to the storage configuration section. Select the iSCSI storage option and provide the necessary details, including the iSCSI target name, IP address, and authentication credentials.

Verify the connection:
Once the Sangfor HCI system is configured to connect to the iSCSI storage device, verify that the connection is working properly. You can do this by checking the status of the iSCSI storage device in the Sangfor HCI management console.

Configure storage pools:
After the iSCSI storage device is connected to Sangfor HCI, you can create storage pools and allocate storage resources as needed.

Configure virtual machines:
Finally, you can configure virtual machines to use the storage resources provided by the iSCSI storage device. This can be done by selecting the iSCSI storage option when creating virtual machines or by modifying the settings of existing virtual machines.

It is important to note that the exact steps involved in attaching external iSCSI storage with Sangfor HCI may vary depending on the specific configuration of your system and the iSCSI storage device being used. Consult the documentation provided by Sangfor HCI and the iSCSI storage device manufacturer for detailed instructions.

rivsy Lv5Posted 20 Mar 2023 15:01
  
If using third party server on the Sangfor HCI is just add the iSCSI storage then create a storage pool to it
Adonis001 Lv3Posted 20 Mar 2023 15:28
  
You can do this by checking the status of the iSCSI storage device in the Sangfor HCI management console.
Jhazz Lv3Posted 20 Mar 2023 15:53
  
In the management portal/console of the Sangfor HCI to can create and add iSCSI storage

I Can Help:

Change

Moderator on This Board

2
20
0

Started Topics

Followers

Follow

Board Leaders