Traffic unable to pass through bridge interface

|
  • 424
  • 11

Issue Description

Traffic not able to pass-through device when connected to ETH0 and ETH2.
New deployment, deploy as bridge

Handling Process

  • Not able to access to device after deployment
  • Due to affected client network, removed the device from network
  • Check deployment, the configured bridge pair is eth1 and eth3
  • However, the physical cable connected is eth0 and eth2 as this is the default bridge pair


Root Cause

Wrongly configured bridge pair on the interface

Solution

Change the configured bridge pair from eth1 and eth3 to eth0 and eth2

Suggestions

Always check the configuration before deploying the device
Surbakti Lv3Posted 03 Feb 2020 15:59
  
thanks for shared
Suwandi_ssc Lv2Posted 07 Feb 2020 19:27
  
very good      
Faisal Posted 10 Aug 2020 08:13
  
Thank you very much for the information ...
Faisal Posted 03 Nov 2020 10:27
  
Nice article ...
Faisal Posted 05 Dec 2020 09:10
  
Great Info
Muhammad Bilal Lv4Posted 09 Feb 2021 17:59
  
Great Info
Ellechar Lv4Posted 15 Feb 2021 09:51
  
Very Nice Infooooooooooooo
Faisal Posted 06 Mar 2021 08:13
  
Very informative …
Faisal Posted 24 May 2021 08:03
  
Nice guidance ...

I want to write a case
Doc ID: 2727
Author: Sangfor 0921
Updated: 2019-12-30 09:31
Version: