When IAM 11.X Is Deployed In Bridge Mode, The Authentication Page Cannot Be Displayed

|
  • 112
  • 6

Issue Description

When IAM 11.0 is deployed in bridge mode, the authentication page cannot be displayed. The password authentication policy is configured and the packet routing is also configured.

Handling Process

1. Check that the bridge IP address is not configured, and the DMZ port is used for redirection.
2. Check the route. The next hop of the default route is the IP address of the interface of the DMZ port peer switch.
3. Check the DMZ option and find that “DMZ Port Redirection” is not checked.

Root Cause

If “DMZ Port Redirection” is not checked, the bridge IP will be used for redirection, but if the bridge IP is not configured, it cannot be redirected at this time.

Solution

Check “DMZ Port Redirection”.
Sangfor_Brando Lv5Posted 03 Jan 2020 09:02
  
Thanks for sharing.
Faisal Posted 12 Aug 2020 09:33
  
Thank you very much for the information ...
Faisal Posted 01 Nov 2020 16:23
  
Nice article ...
Faisal Posted 08 Dec 2020 07:26
  
Great Info
Faisal Posted 08 Mar 2021 07:07
  
Very informative …
Faisal Posted 26 May 2021 08:50
  
Nice guidance ...

I want to write a case
Doc ID: 2661
Author: Siva
Updated: 2019-12-24 14:04
Version: