Configured With Mac Open Authentication But Shows User-Bind Failed When Login In Authentication Page

|
  • 165
  • 6

Issue Description

User configured with password based authentication and allow user to bind with Mac address with open authentication for the first successful login.
but shows user-bind failed when login in authentication page.

Handling Process

  • Disabled the Automatic Binding with mac address, but it still cannot access and prompt out with Checking user-bind failed.
  • Checked in User -> User Binding found out a mac address has been find to the user.

3. Verified with user and found out the mac address above is belong to core-switch.

Root Cause

Because the Automatic bind for mac address bind with the core-switch’s interface and cause other user unable to login.

Solution

The IAM required to configure MAC acquisition across L3 network and so IAM can gain the SNMP’s IP OID and mac OIDfrom the core-switch.
Faisal Posted 25 Aug 2020 08:11
  
Thank you very much for the information ...
Faisal Posted 17 Oct 2020 10:37
  
Nice article ...
Faisal Posted 22 Dec 2020 07:14
  
Great info ...
Ellechar Lv4Posted 20 Jan 2021 15:47
  
Very nice infoooooooooooooooooooooooooooooo
Faisal Posted 23 Mar 2021 08:06
  
Very informative …
Faisal Posted 08 Jun 2021 17:19
  
Nice guidance ...

I want to write a case
Doc ID: 2510
Author: Newbie1212
Updated: 2019-12-21 12:53
Version: