Cannot Redirect To The SSL Root Certificate Installation Page After Checking “SSL Certificate Distribution”

|
  • 177
  • 9

Issue Description

Cannot redirect to the SSL root certificate installation page after checking “SSL Certificate Distribution”

Handling Process

1. Confirm that Troubleshooting is not enabled, and the IP of the test PC is within the scope of the mandatory installation certificate.
2. Check that the device is deployed in bridge mode. Check “Enable destination based routing, and specify port to forward redirected data” to redirect to the root certificate.
3. The virtual IP address cannot be redirected to the root certificate installation interface. After the interface captures the packet, it is found that the 442/444/446 port of the intranet to the virtual address cannot be transmitted to the IAM. The IAM detects whether the terminal installs the root certificate. Ensure that the PC to IAM 442/444/446 port is reachable.

Root Cause

The data of the 442/444/446 port of the PC to IAM’s virtual IP is blocked and the root certificate installation status and redirection cannot be detected.

Solution

Adjust the intranet device, do not intercept the data from the PC to the 442/444/446 port of the IAM virtual IP, and then access the web page to be redirected to the root certificate installation page.
Faisal Posted 10 Aug 2020 08:19
  
Thank you very much for the information ...
Muhammad Bilal Lv4Posted 14 Aug 2020 15:04
  
Thanks for sharing this kind of problem solving.
Muhammad Bilal Lv4Posted 14 Aug 2020 15:04
  
Appreciated...
Faisal Posted 02 Nov 2020 06:58
  
Nice article ...
Faisal Posted 06 Dec 2020 08:14
  
Great Info
Faisal Posted 06 Mar 2021 08:36
  
Very informative …
Faisal Posted 24 May 2021 08:12
  
Nice guidance ...
Saifur Lv3Posted 15 Jun 2021 14:00
  
Informative docs
Raza Islam Lv3Posted 08 Sep 2022 20:30
  
Very informative …

I want to write a case
Doc ID: 2309
Author: God
Updated: 2019-12-24 17:43
Version: