Verify that the DNS and port settings are configured correctly, and check the port statistics to troubleshoot any issues. If necessary, upgrade the firmware and configure the Ethernet interface as "Private

Sangfor HCI is a hyper-converged infrastructure platform that provides a unified dashboard for managing IT resources. To fully converge your data center with Sangfor HCI, you can consolidate compute, networking, and storage capabilities onto industry-standard x86 servers using virtualization technologies.

Sangfor HCI supports a 5-tier architecture consolidated into 1, with a single user interface for managing all IT resources. Sangfor HCI also provides innovative features such as SSD caching and patented I/O localization technology to increase IOPS in a clustered environment

To troubleshoot connection issues with an ATEM Mini device, try connecting the device directly to your computer and disabling Wi-Fi. Make sure both the ATEM Mini and the computer are on the same subnet with different last IP addresses. Check that the device is recognized by the ATEM Setup software and that it is plugged into the Ethernet. If you receive a "Failed to connect" message, try switching to a different CAT6 cable and restarting the device

When editing firewall ACLs, verify that all required IP addresses are included. When configuring router PAT rules, make sure they are properly configured. Confirm that the router and firewall settings are configured correctly, and check for any software or firmware updates that might address compatibility issues

Sangfor HCI provides a range of deployment options, including cloud, on-premises, and hybrid deployments. To manage your infrastructure through a unified dashboard and get AI-driven insights, you can virtualize your data center with Sangfor HCI. Sangfor HCI combines compute, networking, and storage resources onto industry-standard x86 servers using virtualization technologies. Sangfor HCI is often defined according to the requirements of a business system and can help build a data center and deploy a business system more easily

There are a few reasons why Sangfor IAG might not be reachable through LAN. Here are some of the most common causes:

    Incorrect IP address or subnet mask: Make sure that the IP address and subnet mask of the Sangfor IAG device are correct and that they are within the same subnet as the LAN devices.
    Firewall: Check if the firewall on the LAN or on the Sangfor IAG device is blocking traffic to the Sangfor IAG device. Make sure that the appropriate ports are open for Sangfor IAG to communicate with LAN devices.
    Routing issues: Check if there are any routing issues that are preventing LAN devices from reaching the Sangfor IAG device. Make sure that the default gateway for LAN devices is set to the IP address of the Sangfor IAG device.
    Physical connectivity issues: Make sure that the Sangfor IAG device is properly connected to the LAN network and that there are no physical problems with the cables or network ports.
    Device configuration issues: There might be a configuration issue on the Sangfor IAG device that is preventing it from responding to pings or other requests from LAN devices. Check the Sangfor IAG device's configuration for any errors or inconsistencies.

If you have checked all of these things and you still cannot reach the Sangfor IAG device through LAN, then you may need to contact Sangfor technical support for further assistance.

Check IP routing or Ethernet cabling