#Configuration# Installation for SANGFOR HCI
  

Rhebie Lv3Posted 2022-Oct-11 13:15

Last edited by Rhebie 11 Oct 2022 15:26.

#Configuration# Installation for SANGFOR HCI
Product: HCI
Version:6.1.0
1. Introduction
1.1 Scenario
Sangfor HCI software provides an Enterprise-class cloud management platform which integrates resources, such as compute, networking and storage, etc. It is often defined according to requirements of business system and can help to build data center and deploy business system more easily. It combines compute, networking andstorage capabilities onto industry-standard x86 servers by using virtualization technologies. All the resources are aggregated into a resource pool on node basis that is easy to scale out. Sangfor HCI is a suit of software which isinstalled on a physical server, and used to virtualize servers and resources of physical server (CPU/memory/storage, etc), and to provide guest operating systems with complete hardware system functions and independent operating environment, which are called virtual machines.
1.2 Requirements
  • Beforeinstallation, a number of physical servers are needed. Performance of virtualmachines is determined by that of server’s CPU, memory, and storage. The betterthe server’s performance, the better virtual machine’s user experience will be.Additionally, there are some requirements for the physical server on which youwant to install the Sangfor HCI software.
  • Theserver’s CPU must support Intel Intel Virtualization Technology(VT) or AMD-V.For some servers, it is required to enable VT-x in BIOS.
  • Memoryof the server must be greater than 16GB.
  • Freedisk space of the server must be greater than or equal to 60GB. To run virtual machines, data disk is also required. You can use external iSCSI or FC storage,or build virtual storage by configuring SSD and HDD.
  • The server must have at least 4 NICs.



2. Configuration Guide
2.1 Installing Sangfor HCISoftware
Step 1. Writing Image File to USB Drive
  • Launch UltraISO.
  • Select File > Open and load ISO file of Sangfor HCI software from localdisk.


   3.Select Bootable > Write Disk Image and choose the USB drive into which you want to write the image file. Then, click on Writebutton and keep others settings unchanged. You can remove the USB drive after the image file is written to the USB drive.
   4. Enable Virtualization Technology in BIOS, asshown below (Note: BIOS settings vary from computer tocomputer).

Step 2. Installation of Sangfor HCI Manager
  1. Insertthe USB drive into a server, and set the USB drive as the first boot device priority in BIOS settings. Reboot the computer and system enters the following page. Select Install HCI on this machine, and then press ENTERto enterinstallation page.
  2. SelectSANGFOR HCI Installer to begin installation.
   3. Selecta disk where you want to install Sangfor HCI software and then select OK. If there is only one disk, you can select OK directly.
   4. After the disk is selected, you will be prompted to format the disk. Enter “format” to confirm formatting disk, and select OK to continue installation. After you select OK, the Disk Speed Tester page will appear. To test disk speed, select Yes. To skip this step, select No.
   5. Afterinstalling the Sangfor HCI software, you will be prompted to select an Ethernet interface and configure IP address for that interface
(If you skip the step of configuring Ethernet interface, eth0 interface will be chosen and assigned with the IPaddress 10.250.0.7, and gateway will be set to 255.255.255.0 by default. Ifthere are more than one servers having Sangfor HCI software installed but their NICs are not configured, a same default IP address will be assigned to those NICs,resulting in IP address conflict.)

   6. Selectan Ethernet interface and set IP address, netmask and gateway address, thenclick OK.
(Default gateway can only be set for one NIC. IP addresses configured for the selected interface and gateway should beon a same network segment, otherwise error may occur)
   7. Afterthe selected interface is configured, you will be asked whether to continue to configure another interface. Select Yes to return to network configuration page. or select No to finish the installation.
   8. Afterthe installation completes, remove the USB drive and then select Reboot torestart the server.
   9. 1.     Administratorcan log into Web admin console of Sangfor HCI platform by entering https://IPaddress into browser address bar(that IP address is the IP address of the Ethernet interface selected on the network configuration page).
(Note: Web admin console of Sangfor HCI platform can only be accessed through the following browsers: Chrome, Firefox, IE11, IE10.)

3. Precaution
1. To avoid interruptions during installation process, you must have a redundant power connection with power backup.

12606344ea2a3fb86.png (223 KB, Downloads: 747)

12606344ea2a3fb86.png

85976344ea6baf353.png (223 KB, Downloads: 746)

85976344ea6baf353.png

788996344ec1c22dee.png (47.83 KB, Downloads: 750)

788996344ec1c22dee.png

730296344ec3fc0a5f.png (79.2 KB, Downloads: 741)

730296344ec3fc0a5f.png

175216344ec535d302.png (82.62 KB, Downloads: 747)

175216344ec535d302.png

881716344ec8e741d6.png (60.56 KB, Downloads: 737)

881716344ec8e741d6.png

983256344ed4ad5a50.png (82.62 KB, Downloads: 738)

983256344ed4ad5a50.png

338076344ed7246ff3.png (60.56 KB, Downloads: 733)

338076344ed7246ff3.png

467796344edba79133.png (29.74 KB, Downloads: 746)

467796344edba79133.png

448446344ee059f92d.png (70.82 KB, Downloads: 750)

448446344ee059f92d.png

621786344ee1a84564.png (194.96 KB, Downloads: 743)

621786344ee1a84564.png

510126344ee4fa837d.png (194.96 KB, Downloads: 744)

510126344ee4fa837d.png

731826344ee519fbf4.png (194.96 KB, Downloads: 735)

731826344ee519fbf4.png

292076344ee711f756.png (94.26 KB, Downloads: 733)

292076344ee711f756.png

260786344ee78b69d5.png (140.2 KB, Downloads: 744)

260786344ee78b69d5.png

124046344ee7d2ed35.png (140.2 KB, Downloads: 734)

124046344ee7d2ed35.png

348616344eeaf9986c.png (55.27 KB, Downloads: 737)

348616344eeaf9986c.png

31376344eeb8bafaa.png (82.47 KB, Downloads: 747)

31376344eeb8bafaa.png

135356344eeb8ec772.png (82.47 KB, Downloads: 746)

135356344eeb8ec772.png

309166344eec290848.png (48.31 KB, Downloads: 742)

309166344eec290848.png

519166344eecc2899f.png (80.12 KB, Downloads: 739)

519166344eecc2899f.png

435356344ef36654c2.png (53.59 KB, Downloads: 739)

435356344ef36654c2.png

504676344ef3b7586c.png (80.12 KB, Downloads: 739)

504676344ef3b7586c.png

679156344ef442091e.png (78.11 KB, Downloads: 753)

679156344ef442091e.png

200736344ef4f42f6c.png (52.92 KB, Downloads: 734)

200736344ef4f42f6c.png

137966344ef55ee2a8.png (52.92 KB, Downloads: 736)

137966344ef55ee2a8.png

867386344ef7855210.png (67.23 KB, Downloads: 755)

867386344ef7855210.png

Like this topic? Like it or reward the author.

Creating a topic earns you 5 coins. A featured or excellent topic earns you more coins. What is Coin?

Enter your mobile phone number and company name for better service. Go

Newbie517762 Lv5Posted 2022-Oct-11 14:06
  
Thanks for your sharing !
rivsy Lv5Posted 2022-Oct-11 14:31
  
thank you for this wonderful information
RegiBoy Lv5Posted 2022-Oct-11 22:42
  
nice but too long?
Zonger Lv5Posted 2022-Oct-12 04:30
  
Thanks for sharing
Faisal P Posted 2022-Oct-12 11:16
  
Thank you very much for the information ...
Zonger Lv5Posted 2022-Oct-24 03:24
  
Good article
Zonger Lv5Posted 2022-Oct-24 03:24
  
Informative post
arjay Lv3Posted 2022-Oct-24 08:25
  
Thank you for this but I believe Sangfor already provided the User Manual for the Configuration/Setup of all the products.
Sangfor Jojo Lv5Posted 2022-Nov-07 15:59
  
Hello Rhebie, I'm glad to know that you like sharing knowledge with other members. But this manual exists in the Knowledge Base. You can share us some installation guides, configuration guides or troubleshooting guides based on the latest version.