IAG is not reachable to LAN

IAG is not reachable to LAN

you may want to try these steps to resolve the issues
- check that all cables and connections between your LAN devices and IAG are properly connected
- check if IAG is powered ON and functioning properly
- check if IAG has a valid IP address and is on same subnet as your LAN devices
- check firewall settings on your IAG and see if it's blocking LAN traffic or specific ports that the LAN devices require. also check routing and network configuration on your IAG to make sure there's communication between IAG and LAN devices
- try to update the firmware version of your IAG

HiHi,

If you give more information like a network topology, screen capture, error message, or log file ...etc.
It will help us understand your problem better.

Thanks.

Check the network cables and connections to ensure they are properly configured. Verify the device's IP address and subnet mask settings to confirm they are within the same network range as the LAN. Also, inspect the firewall settings on the Sangfor IAG device to make sure it allows traffic from the LAN. Check for any software or firmware updates for the Sangfor IAG device that might address compatibility issues.

To troubleshoot connectivity issues with a Sangfor IAG device, check the network cables and connections to ensure they are properly configured. Verify the device's IP address and subnet mask settings to confirm they are within the same network range as the LAN.

inspect the firewall settings on the Sangfor IAG device to make sure it allows traffic from the LAN. Check for any software or firmware updates for the Sangfor IAG device that might address compatibility issues

If you are experiencing connection issues with a Speedgoat target computer, try pinging the target computer to verify connectivity. Double-check the IP address and subnet mask settings on both the Speedgoat computer and the development computer Ethernet interface.

If you are experiencing connection issues with a Speedgoat target computer, try pinging the target computer to verify connectivity. Double-check the IP address and subnet mask settings on both the Speedgoat computer and the development computer Ethernet interface.

Verify that the firewall and antivirus settings on the host PC allow communication with the target computer. If necessary, update the target software and Ethernet driver, and try disabling the firewall and antivirus software temporarily

When setting up a SonicWall switch, make sure you have set a static IP address on your system's Ethernet adapter. Check that the address and subnet mask are correct, and update the settings if necessary.