High availability scenario

HWSD Lv1Posted 2022-Nov-18 00:10

Is it possible to have an HA setup using a virtual instance of NGAF, running on HCI, as active device and an hardware NGAF as standby device?

jetjetd has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

I think the best practice when doing an HA is having the same identity as long as possible to avoid some issues happening. If you are using a virtual instance might as well the HA device is virtual instance also the same if you are having a hardware.
Is this answer helpful?
jetjetd Lv5Posted 2022-Nov-18 11:21
  
I think the best practice when doing an HA is having the same identity as long as possible to avoid some issues happening. If you are using a virtual instance might as well the HA device is virtual instance also the same if you are having a hardware.
sumran Lv2Posted 2022-Nov-18 13:31
  
yes possible but HA has same link speed and same model devices
rivsy Lv5Posted 2022-Nov-18 15:18
  
For HA configuration of firewall there are 2 types which is ACTIVE - ACTIVE setup and ACTIVE - PASSIVE setup.
Active - Active configuration they shared both the network load or both firewall is active while the Active - Passive configuration both processes traffic flow (I recommend this kind of setup because the Passive device is triggered when the Active device failed).

Advantage/s:
Active-Active setup
1. Resillence
2. Increase on total throughput

Active-Passive setup
2. Network resillence
damulagski Lv3Posted 2022-Nov-20 22:26
  
Yes it is possible when if the hardware has the same specs
soneosansan Lv3Posted 2022-Nov-20 22:32
  
The Rule is to have same specification of the two appliance
nobitachou Lv2Posted 2022-Nov-20 22:39
  
Active/Active, Active/Standby can be configured on the NGAF load balancing
Naomi Posted 2022-Nov-21 09:48
  
For the instances, I think it is possible.
Happpy Lv3Posted 2022-Nov-21 10:01
  
Best practice is to have same specs, identity and form factor
babeshuka Lv3Posted 2022-Nov-21 10:42
  
There are two types of HA configurations for firewalls: ACTIVE - ACTIVE and ACTIVE - PASSIVE.
They shared both the network load and the active configuration.

I Can Help:

Change

Moderator on This Board

11
7
5

Started Topics

Followers

Follow

1
3
5

Started Topics

Followers

Follow

0
4
5

Started Topics

Followers

Follow

67
20
3

Started Topics

Followers

Follow

3
14
3

Started Topics

Followers

Follow

1
137
3

Started Topics

Followers

Follow

Board Leaders