SANGFOR Malaysia Return Materials Authorization (RMA) Procedure
  

Allen Lv1Posted 2020-May-15 09:38

Last edited by Allen 18 May 2020 10:24.

1.Introduction

This RMA Process aims to assist SANGFOR customers and partners to return a suspected hardware to the manufacturer, please find the RMA Process detailed as below.

2.RMA Procedure
Step 1: Contact SANGFOR TAC (Technical Assistance Center) to get the troubleshooting assistance. SANGFOR support engineer will assist you to troubleshoot the issue and verify whether any hardware repair or replacement is needed. If the hardware is verified likely to be defective, Engineer will issue a Return Material Authorization (RMA) Case and request customer to provide the following customer information of the unit that needs repair or replacement.
Company/Organization Name
Contact Person
Contact PhoneNumber
Contact Email Address
Shipping Address
Problem Description
Serial Numberand Gateway ID of the Unit Requested for Support
The RMA Track ID (RMA TID) is to ensure the proper tracking and handling of the returned unit. Any returned unit without an authorized RMA TID will be rejected. RMA TID may also use the case ID in iCare and every RMA case has to be record into iCare system. If there’s any customer purchased a temporary device replacement warranty, therefore SANGFOR will need to provide a temporary device to customer.
Step 2: Please labeling the following information on the outside of shipping package clearly.
RMA TID
Hardware Serial Number of Shipping Unit
SANGFOR will reject any product without an authorized RMA TIDat the time of delivery. At the meantime, SANGFOR will return the unit without proper RMA labeling to the shipper via collect freight.
It is essential to use the original container or the similar equivalent. All shipments need to be properly packaged. Customer will be responsible for any damage or loss in transit, if Customer fails to use adequate packaging or ships the Product on their own account.
Step 3: Return the defective unit to SANGFOR
If the process involves the replacement of spare unit or parts, SANGFOR will provide the spare unit or parts and take defective back.
When a replacement unit has been issued, the customer will receive a shipment notification which will include instructions regarding the defective hardware return process.
The defective hardware is required to return to SANGFOR within 5 working days after the replacement unit has been delivered. If the defective unit has not been returned within 15 working days after the replacement unit has been delivered, customer will be invoiced at a full list price of the replacement unit.
3.RMA Contacts and Shipping Addresses
Sangfor Technical Assistance Center
Email
Send the following information to tech.support@sangfor.com
Serial number of hardware with issue.
Software version
Configuration data
Detailed description of the issue, including the impact and coverage.
The activity when the issue occurred.
Phone
Malaysia: 1700 81 7071
International: +60 12711 7129 (7511)
Sangfor Technologies (Malaysia) Sdn Bhd
Add: 47-10 The Boulevard Offices, Mid Valley City, Lingkaran Syed Putra, Mid Valley City, 59200 Kuala Lumpur, Wilayah Persekutuan Kuala Lumpur

SANGFOR Malaysia Return Materials Authorization (RMA) Procedure.pdf

1.87 MB, Downloads: 3090

Like this topic? Like it or reward the author.

Creating a topic earns you 5 coins. A featured or excellent topic earns you more coins. What is Coin?

Enter your mobile phone number and company name for better service. Go

Faisal Posted 2021-Jul-23 15:17
  
Thank you very much for the information ...

Trending Topics

Board Leaders