1/4
Is Athena EPP 6.0.4EN officially compatible with RHEL 9.8?

MShakeel Lv1  Posted 2026-Oct-05 14:28

Hi Sangfor Community,

I have a Red Hat Enterprise Linux (RHEL) 9.8 server, but I am unable to install the Athena EPP 6.0.4EN agent on this server.

Could anyone please confirm:

Is Athena EPP 6.0.4EN officially compatible with RHEL 9.8?

If not, which Athena EPP Agent version supports RHEL 9.8?

Is there any updated Linux agent/package available for RHEL 9.8?

Are there any specific kernel, dependency, SELinux, or Secure Boot requirements for installation?

What is the recommended solution if Athena EPP 6.0.4EN cannot be installed on RHEL 9.8?

Server OS: Red Hat Enterprise Linux 9.8
Athena EPP Agent: 6.0.4EN

Any guidance or official compatibility information would be highly appreciated.

Thank you.

Newbie517762 has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

HiHi,  

According to the official Sangfor Athena EPP 6.0.4R4 Compatibility List, this operating system is partially supported. Please contact TAC for the agent installation method. Note that advanced threat-related features are not supported on this operating system.

Please find the screenshot below for quick reference. The Athena EPP 6.0.4R4 Compatibility List is also attached, thanks.


Sangfor Athena EPP 6.0.4R4 Compatibility List 20260901.pdf (109.1 KB, Downloads: 268)
Is this answer helpful?
Newbie900829 Lv2  Posted 2026-Oct-05 14:46
  
Facing the same scenario in lab. RHEL 9.8 uses kernel 5.14.0 series and Athena EPP 6.0.4EN agent compilation is failing due to kernel header mismatch. Official compatibility list for 6.0.4EN shows support till RHEL 9.3/9.4 only. For RHEL 9.8 you likely need Athena EPP 6.0.6+ or the specific kmod patch from support. Also ensure kernel-devel, elfutils-libelf-devel are installed, Secure Boot is disabled, and SELinux set to permissive during installation. Please check with Sangfor TAC if any beta package for RHEL 9.8 is available.
Humayun Ahmed Lv4  Posted 2026-Oct-05 15:04
  
Do not spend too much time trying to force the 6.0.4EN agent onto RHEL 9.8. Instead:

Obtain the latest Athena EPP Linux agent available for your EPP Manager.
Confirm from Sangfor that the agent explicitly supports RHEL 9.8 / its exact kernel.
Check whether your EPP Manager itself must be upgraded before the newer Linux agent can be deployed.
If Secure Boot is enabled, ask Sangfor to confirm whether the particular Linux agent/kernel module supports your Secure Boot configuration.
Check SELinux status and audit logs if the newer supported agent still fails.

Check the exact kernel:

cat /etc/redhat-release
uname -r
getenforce
mokutil --sb-state
Also check the installer output rather than assuming it is a dependency problem.

Deployment on Linux.pdf

219.05 KB, Downloads: 244

Newbie006434 Lv2  Posted 2026-Oct-05 17:09
  
Athena EPP 6.0.4EN does not officially support RHEL 9.8 yet, it supports till RHEL 9.3/9.4 only. RHEL 9.8 kernel 5.14.0-5xx needs EPP 6.0.6+ or kmod hotfix. Please disable Secure Boot, set SELinux to permissive, install kernel-devel and elfutils-libelf-devel, and contact Sangfor TAC for RHEL 9.8 supported package.
Newbie517762 Lv5  Posted 2026-Oct-05 17:56
  
HiHi,  

According to the official Sangfor Athena EPP 6.0.4R4 Compatibility List, this operating system is partially supported. Please contact TAC for the agent installation method. Note that advanced threat-related features are not supported on this operating system.

Please find the screenshot below for quick reference. The Athena EPP 6.0.4R4 Compatibility List is also attached, thanks.


Sangfor Athena EPP 6.0.4R4 Compatibility List 20260901.pdf (109.1 KB, Downloads: 268)
Newbie380273 Lv2  Posted 2026-Oct-05 22:49
  
Hi, I checked this issue before.

According to Sangfor Athena EPP 6.0.4R4 Compatibility List, RHEL 9.8 is **Partially Supported** with Athena EPP 6.0.4EN - 6.0.4R4. It is not fully compatible like RHEL 7.x / 8.x.

Reason you cannot install 6.0.4EN agent:
RHEL 9.8 uses kernel 5.14.0-XXX, and the 6.0.4EN driver/kernel module is not built for this new kernel. So installer fails.

Solution:

1.  **Don't force 6.0.4EN:** Download the latest Linux agent from your EPP Manager (Endpoint Security Console > Agent Deployment). Sangfor released updated agent for RHEL 9.x series in 6.0.4R4+ build.

2.  **Upgrade EPP Manager first:** Your EPP Manager must be on 6.0.4R4 or above, otherwise it will not push RHEL 9.8 compatible agent.

3.  **Check prerequisites:**
    cat /etc/redhat-release
    uname -r
    getenforce
    mokutil --sb-state
    If Secure Boot is enabled, you need to enroll Sangfor key or disable Secure Boot temporarily. Also set SELinux to permissive during install.

4.  **Advanced threat features are limited** on RHEL 9.8 even after install - this is mentioned in Compatibility List as partially supported.

If latest agent still fails, please open ticket with Sangfor TAC with installer logs (/var/log/sangfor/*.log).

Hope this helps!
Prosi Lv4  Posted 2026-Oct-08 14:07
  
Hi,

Is Athena EPP 6.0.4EN officially compatible with RHEL 9.8?
No. Athena EPP 6.0.4EN is not officially compatible with RHEL 9.8. The agent installer uses strict OS version checks and fails automatically if the exact kernel/OS minor release is not explicitly listed in its predefined compatibility matrix.
Which Athena EPP Agent version supports RHEL 9.8?
You need Athena EPP 6.0.4R4 or later (released in mid-2026) to expand coverage across late-lifecycle RHEL 9 minor releases.
Is there an updated Linux agent/package available?
Yes. An updated Linux 64-Bit Full Agent Installer is available under the latest stable update branches (such as 6.0.4R4 Stable).
AR Lv3  Posted 2026-Oct-10 11:07
  
Hello

Is RHEL 9.8 officially compatible with Athena EPP 6.0.4EN?
No, RHEL 9.8 is not officially compatible with Athena EPP 6.0.4EN. Strict OS version checks are used by the agent installer, which will automatically fail if the precise kernel/OS minor release is not specified in its compatibility matrix.
Which version of the Athena EPP Agent is compatible with RHEL 9.8?
To increase coverage across late-lifecycle RHEL 9 minor releases, Athena EPP 6.0.4R4 or later (issued in mid-2026) is required.
Is an updated Linux package or agent available?
Indeed. The most recent stable update branches (such as 6.0.4R4 Stable) offer an upgraded Linux 64-Bit Full Agent Installer.

I Can Help:

Change

Moderator on This Board

2
1
0

Started Topics

Followers

Follow

1
1
0

Started Topics

Followers

Follow

1190
263
101

Started Topics

Followers

Follow

Trending Topics

Board Leaders