1/4
Vcenter refresh rate

EduardoOliveira Lv1  Posted 2026-Oct-03 05:43

Hello team,

Is there anyway to reduce the refresh rate of scp withib the vcenter?

Customer make changes on vcenter like deploying machine and i take a long time to show up on scp

Newbie901019 has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Prior to SCP 6.12.0, VMware resource pools cannot be manually synchronized and have a default automatic synchronization cycle of 1 hour. Starting from SCP 6.12.0, you can manually trigger an immediate synchronization from the resource pool page without waiting for the cycle.

How to Accelerate Synchronization:
SCP 6.12.0 and Later
Manual sync: Go to [Resource Center] → [Resource Pool], locate your VMware resource pool, and click the Sync Data option on the right.

SCP 5.7 – 6.11.3
Default cycle: Operations on VMware sync to SCP by default within 1 hour. Manual synchronization is not available for VMware resource pools in this version range.
You cannot reduce or bypass this interval through configuration. Upgrading to SCP 6.12.0 or later is the documented path to gain manual sync capability.

If your current version is below 6.12.0, plan an upgrade to benefit from immediate manual synchronization.
Is this answer helpful?
Newbie900829 Lv2  Posted 2026-Oct-03 10:31
  


> Hello, this delay is expected because SCP pulls vCenter inventory on a schedule (default 30 min). For instant update, go to SCP > Virtual Infrastructure > vCenter and use the Refresh/Sync option. We can lower the polling interval from the backend, but it is not advised for production as it increases API load on vCenter.
Newbie006434 Lv2  Posted 2026-Oct-03 11:33
  


> Hi, This is normal behavior. SCP syncs vCenter inventory every ∼30 mins, so new VMs will show with a delay. You can manually refresh it from SCP > Infrastructure > Virtual Infrastructure > vCenter > Sync.
Newbie380273 Lv2  Posted 2026-Oct-03 22:58
  

Hello,

Currently, SCP syncs with vCenter via periodic polling (API query), there is no manual setting to reduce refresh rate to real-time in the UI.

The default sync interval is around 5-15 minutes depending on your HCI/SCP version. So when customer deploys a VM in vCenter, it will take some time to reflect in SCP portal.

You can try this:

1.  **Manual Refresh:** In SCP -> Infrastructure -> vCenter Management / Managed Clusters, there is a Sync / Refresh button (in newer versions). Click it to force immediate sync.

2.  **Check SCP Service:** The sync is handled by scp-vcenter-proxy service. If sync is taking too long (more than 15 min), check if vCenter is reachable, API user has enough permission (Read-only minimum), and no high latency between SCP and vCenter.

3.  **Upgrade SCP:** In latest SCP 6.10.x, the sync performance is improved compared to older versions.

You cannot set it to 30 seconds or 1 minute because frequent API polling will overload vCenter.

If customer needs instant visibility, recommend to deploy VM from SCP portal instead of directly from vCenter, then it will show immediately.

Thanks.
Newbie901019 Lv1  Posted 2026-Oct-04 05:16
  
Prior to SCP 6.12.0, VMware resource pools cannot be manually synchronized and have a default automatic synchronization cycle of 1 hour. Starting from SCP 6.12.0, you can manually trigger an immediate synchronization from the resource pool page without waiting for the cycle.

How to Accelerate Synchronization:
SCP 6.12.0 and Later
Manual sync: Go to [Resource Center] → [Resource Pool], locate your VMware resource pool, and click the Sync Data option on the right.

SCP 5.7 – 6.11.3
Default cycle: Operations on VMware sync to SCP by default within 1 hour. Manual synchronization is not available for VMware resource pools in this version range.
You cannot reduce or bypass this interval through configuration. Upgrading to SCP 6.12.0 or later is the documented path to gain manual sync capability.

If your current version is below 6.12.0, plan an upgrade to benefit from immediate manual synchronization.
Humayun Ahmed Lv4  Posted 2026-Oct-05 13:22
  
Yes, possibly, but I would first distinguish between the vCenter inventory refresh interval and the actual synchronization mechanism. Sangfor's current SCP documentation confirms VMware integration and a dedicated VMware Integration Guide, but the public documentation I found does not expose a documented user-configurable “refresh every X seconds” setting.

Guide:
https://support.sangfor.com/prod ... 2&product_id=45

I Can Help:

Change

Board Leaders

George ...

Weekly Sharers

George ...

Weekly Questioners