NSF Web Console - No Management Method is Specified

jondoe Lv1Posted Apr-16-2026 12:46

Dear All/Suhu,

I want to view running configuration on NSF device via web console.
When I enter the command " show running-configuration" it needs login first, but when I login and entered password it show "No Management Method is Specified" as shown on attachment.
Please help.

Thanks

This topic contains more resources

You must log in to download or view the file. Not registered yet? Register

x

By solving this question, you may help 972 user(s).

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Damai_Group Lv1Posted Apr-17-2026 13:03
  
Hi jondoe,

The error "No management method is specified" on a Sangfor NSF device usually means the CLI is trying to use an external authentication method (like RADIUS or TACACS+) that is not set up, or the specific command expects web GUI login context inside the CLI session.

Since you already see the "admin#" prompt, you are already logged into the CLI. The extra login prompt is a known behavior on some Sangfor firmware versions when using "show running-configuration". Here are the ways to actually get the running configuration.

Option 1 - Try an Alternative CLI Command
Instead of "show running-configuration", try one of these:
more system:running-config
or
show config running

Option 2 - Export via Web GUI (Most Reliable)
1. Log in to the Sangfor NSF web management page (GUI).
2. Navigate to System > Maintenance > Configuration Backup.
3. Click Export Running Configuration or Download.
4. Save the file. This is the full plain text configuration you need.

Option 3 - Check Enable Mode
If an enable password is configured, you may need to enter privileged mode first:
admin> enable
Password: [your enable password]
admin# show running-config

Option 4 - Check AAA Settings in Web GUI
If you have GUI access, go to System > Admin > Authentication and verify that Local Authentication is enabled and set as the primary method for CLI access. If an unused AAA server is listed first, the CLI might be trying to reach it and failing.

Why This Happens
On Sangfor NSF, the command "login admin" inside an existing CLI session is often meant for web portal authentication, not for CLI access. The device doesn't know which management interface (HTTP/HTTPS) to use for that secondary login, hence the "No management method is specified" message.

I Can Help:

Change

Moderator on This Board

1
149
3

Started Topics

Followers

Follow

962
199
98

Started Topics

Followers

Follow

Board Leaders