Factory Reset w/o password & firmware license

Chow Kok Keong Lv1Posted 12 Nov 2024 11:48

Last edited by Chow Kok Keong 12 Nov 2024 11:50.

Dear Sangfor Community, is there anyway to factory reset the firewall without password & the firmware update license? I have tried to use the Sangfor Firmware Updater but it will always fail and disconnect me from it. The current firmware version of the unit is v7.1.97 EN R1 B Build20161114. I have tried to find the firmware file online but to no avail. Is there any other way? I'm basically locked out from the firewall as the previous IT has enabled local authentication w/o providing me the credentials for it.

Newbie517762 has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Last edited by Newbie517762 12 Nov 2024 14:13.

HiHi,

You can reset your Admin password using a USB.
- https://knowledgebase.sangfor.co ... 2articleType%22%3A1,%22articleId%22%3A%229deea1575f244b7b86cd79f252e42500%22,%22keyword%22%3A%22%22%7D

And please check your device licenses, which are primarily used to control the functionalities of the device.
They are categorized into: Network License, Security Capabilities and Updates, Cloud Service Subscription, Software Upgrade.
Is this answer helpful?
fuadmahbubun Lv2Posted 12 Nov 2024 13:02
  
HI, if you have right priviledge to control your firewall device,
first you can reset admin password with theese steps.
1. prepare an usb flashdisk, then format usb flash drive using Fat32 Format, and create file reset-password.txt
2. plug in usb flashdrive to NGAF then restart firewall
3. during reboot process, admin password will be changed to admin, username : admin password : admin

second steps try update firmware with new admin password.
please share you result here.
Newbie517762 Lv5Posted 12 Nov 2024 14:11
  
Last edited by Newbie517762 12 Nov 2024 14:13.

HiHi,

You can reset your Admin password using a USB.
- https://knowledgebase.sangfor.co ... 2articleType%22%3A1,%22articleId%22%3A%229deea1575f244b7b86cd79f252e42500%22,%22keyword%22%3A%22%22%7D

And please check your device licenses, which are primarily used to control the functionalities of the device.
They are categorized into: Network License, Security Capabilities and Updates, Cloud Service Subscription, Software Upgrade.
Enrico Vanzetto Lv4Posted 12 Nov 2024 15:39
  
Hi, you can reset it using a USB/Flash drive.

Create an empty text file named reset-password.txt in the root directory of the USB drive.

Insert the USB drive into either of the USB ports located on the front side of the NGAF where the Ethernet ports are, then restart your NGAF.

Once the NGAF can successfully log on to the Web User Interface, remove the USB drive.

Check the reset-password.txt file on the USB drive. If the recovery was successful, the restored password will be recorded in the file (logs created). If unsuccessful, the log will contain information about the recovery failure.

Source (replace xx with tt to make link clickable): hxxps://community.sangfor.com/archiver/?tid-1884.html

I Can Help:

Change

Moderator on This Board

11
7
5

Started Topics

Followers

Follow

1
3
5

Started Topics

Followers

Follow

0
4
5

Started Topics

Followers

Follow

67
20
3

Started Topics

Followers

Follow

3
14
3

Started Topics

Followers

Follow

1
137
3

Started Topics

Followers

Follow

Board Leaders