default standard and additional network ports of Sangfor IAG

Hi everyone,

I'm currently setting up a firewall for a network that uses Sangfor IAG. I've gone through the documentation but haven't been able to find a comprehensive list of the default ports that Sangfor IAG uses, both standard and any additional ones that might be necessary for full functionality. Does anyone know which ports are typically used by Sangfor IAG, or where I might find this information? Any help would be greatly appreciated.

Thank you!

Typically used for portal authentication is port 8443.
VPN with SSL:
SSL VPN connections use port 8443, or another specified port.

- Access for Administrators:
The Sangfor IAG interface's administrative access is provided via port 4433, or another defined port.

The Integration of LDAP/AD:
To integrate LDAP, use port 389 (LDAP).
For safe LDAP integration, use port 636 (LDAPS).

- RADIUS Enrollment:
RADIUS port 1812 is utilized for authentication purposes.

-ICMP:
Ping, or ICMP Echo Request/Reply: Network troubleshooting may benefit from an analysis of ICMP data.

- Authentication for Portals:
Typically used for portal authentication is port 8443.
VPN with SSL:
SSL VPN connections use port 8443, or another specified port.

- Web Access via HTTP/HTTPS:
The default port for unencrypted web traffic is port 80 (HTTP).
The default port for encrypted web communication is 443 (HTTPS).

If Sangfor IAG uses configuration files, you might find port information within those files. Check the configuration files on the server where Sangfor IAG is installed.

Reach out to Sangfor's technical support. They should be able to provide you with the most accurate and up-to-date information regarding default ports and any additional ports required for specific functionalities.

Standard ports, such as 80 for HTTP and 443 for HTTPS, are usually used by Sangfor IAG.

s always best to refer to the official documentation provided by Sangfor for their IAG product. Check the user manuals, deployment guides, or any documents related to network configuration. Sometimes, specific port information is included in these documents.

HiHi,

Sangfor IAG uses a set of default ports for communication.

The following table lists the default ports used by Sangfor IAG:

Sangfor IAG Default Ports:

Standard Ports:

    HTTPS: 443
    HTTP: 80
    LDAP: 389
    LDAPS: 636
    RADIUS: 1812
    TACACS+: 49

Additional Ports for Specific Functionalities:

    IAG Management Console: 8080
    IAG Web Portal: 8443
    IAG Mobile App: 443 (HTTPS)
    IAG Terminal Server: 3389
    IAG RDP Gateway: 443 (HTTPS)

Hi, it depends about how and what you configure on Sangfor IAG.

When you configutr Sangfor IAG for first time, the ports used are:

tcp 4433 for administrative management
tcp 8443 for portal authentication
tcp 80 and tcp 443 for updates