Migrate from IBM Power8 to Sangfor HCI 5

moazanjum Lv1Posted 03 Oct 2023 19:58

I have a customer and they are using IBM Power8 based machines. Now they want to switch towards an HCI solution using intel-based commodity hardware. However, AIX + DB2 are running smoothly on IBM servers.
they still want to explore option if there is a possibility to migrate these machines to HCI platform.
question is:
1) Is it possible to do so without changing OS platform i.e: AIX to RHEL
2) Does Sangfor HCI supports? or is there any service offered by Sangfor to size, plan & migrate the whole IBM thing to a new platform including the application and OS etc..

Abdul Sami has solved this question and earned 25 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins, 5 coins of bounty and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Functionality of the database in AIX is identical to that running on RHEL X86. But due to differences in endianness (Big-Endian to Little-Endian) a traditional Db2 Backup and Restore will not work. The data must be “byte reversed" and reloaded.
In a nutshell yes DB2 can be migrated from AIX platform to x86 RHEL (Conditions Applied for Migration) but as for AIX OS it is not possible.
Can share detailed migration steps for DB2 if needed.
Is this answer helpful?
MTR Lv2Posted 15 Oct 2023 20:56
  
Migrating IBM Power8 based machines running AIX and DB2 to an HCI (Hyperconverged Infrastructure) platform using Intel-based commodity hardware is a complex task, and several considerations need to be taken into account. Let's address your questions:

Is it possible to do so without changing OS platform i.e., AIX to RHEL?

It's generally not straightforward to directly migrate from AIX to a Linux-based OS like RHEL (Red Hat Enterprise Linux) due to fundamental differences in the underlying architecture (PowerPC vs. x86/x86_64). This would typically involve a re-platforming effort.

AIX applications are compiled for the PowerPC architecture and would need to be recompiled for x86_64 to run on RHEL. Additionally, data migration and compatibility issues may arise.

AIX also has specialized features and configurations that may not have direct equivalents in a Linux environment.

Does Sangfor HCI support this migration, or is there any service offered by Sangfor to size, plan & migrate the whole IBM thing to a new platform including the application and OS, etc.?

As of my last knowledge update in September 2021, Sangfor HCI is an HCI solution designed for x86/x86_64 architecture. It's not designed for the PowerPC architecture used by IBM Power8.

Sangfor may have services or consulting options available for migration projects, but this would need to be confirmed with Sangfor directly. They might be able to assist with the planning and execution of a migration project, but it's important to ensure that their solution is compatible with the target hardware and software environment.

For such a critical and complex migration, it's recommended to engage with a professional services team, either from the HCI vendor or a third-party consulting firm, with expertise in both IBM Power Systems and x86/x86_64 architectures.

In summary, while migration from AIX to an x86/x86_64-based HCI platform is possible, it's a significant undertaking. It's crucial to engage with experts who have experience in both environments to plan and execute the migration successfully. Consulting with Sangfor directly would be a good first step to explore their capabilities and services for such a migration.




Hector Ignacio Lv2Posted 12 Oct 2023 15:15
  
Yes, you can transfer AIX DB2 to Sangfor HCI without switching OSs. In order to facilitate and speed up the migration process, Sangfor HCI supports AIX as a guest operating system and offers a variety of tools and functionalities.
GingP Lv2Posted 12 Oct 2023 15:13
  
Due to differences in architecture and compatibility, moving from AIX and DB2 to an HCI platform on Intel-based systems without changing the OS is quite difficult. To perform a successful relocation, professional services and meticulous preparation are necessary, and outside specialists could be required. Sangfor and other HCI manufacturers can help with infrastructure implementation, but they might not be able to handle the difficulties of moving from AIX to Linux.
Adonis001 Lv3Posted 12 Oct 2023 15:10
  
It is advised to get in touch with Sangfor's technical support or consulting services directly if you have any questions about the service they provide. The amount of assistance they can give for the conversion of AIX and DB2 applications, as well as if they offer services to assist with sizing, planning, and migration of the IBM Power8-based computers to their HCI platform, will be made clear by them.
isabelita Lv3Posted 12 Oct 2023 15:09
  
Does Sangfor HCI enable this? Does Sangfor provide any services to size, plan, and migrate the entire IBM system to a new platform, including the application and OS, etc.?
- Sangfor HCI does not natively support AIX; instead, it primarily supports x86-based hardware and virtualization technologies like VMware and Hyper-V. Other HCI vendors often give expert services to aid in the planning and execution of migrations.
MISMIS Lv3Posted 12 Oct 2023 15:08
  
It is theoretically feasible to migrate from AIX to RHEL on an HCI infrastructure, but it would take a lot of time and work. There might be difficulties with software compatibility, application migration, and possible performance variations because AIX and RHEL are two different operating systems. To make sure programs function effectively on the new platform, it could be necessary to rewrite or reconfigure them.
noime Lv3Posted 12 Oct 2023 14:58
  
In a nutshell, the answer is that DB2 can be transferred from the AIX platform to x86 RHEL (Conditions Applied for Migration), but not from the AIX OS.
I can provide specific DB2 migration instructions upon request.
Noah19 Lv3Posted 12 Oct 2023 14:57
  
The database's functionality on AIX is the same as it is under RHEL X86. However, a standard Db2 Backup and Restore will not function because to variations in endianness (from Big-Endian to Little-Endian). The information has to be "byte reversed" and reloaded.
RegiBoy Lv5Posted 11 Oct 2023 11:40
  
Can AIX DB2 be migrated to Sangfor HCI without switching OSs?


Without changing the OS, it is feasible to go from AIX DB2 to Sangfor HCI. In order to facilitate and speed up the migration process, Sangfor HCI supports AIX as a guest operating system and offers a variety of tools and functionalities.



Sangfor HCI supports, right? Or does Sangfor provide any services to size, plan, and migrate everything associated with IBM to a new platform, including the application and OS etc.?
jerome_itable Lv3Posted 11 Oct 2023 08:24
  
Is it possible to migrate AIX DB2 to Sangfor HCI without changing OS?

Yes, it is possible to migrate AIX DB2 to Sangfor HCI without changing the OS. Sangfor HCI supports AIX as a guest operating system, and it provides a number of tools and features to make the migration process as smooth and efficient as possible.

Does Sangfor HCI supports? or is there any service offered by Sangfor to size, plan & migrate the whole IBM thing to a new platform including the application and OS etc.?

Yes, Sangfor HCI supports the migration of AIX DB2 from IBM Power8 machines to Sangfor HCI. Sangfor also offers a number of services to help customers size, plan, and migrate their AIX DB2 environments to Sangfor HCI.

Here are some of the key benefits of migrating AIX DB2 to Sangfor HCI:

    Reduced costs: Sangfor HCI is a cost-effective HCI solution that can help customers save money on their hardware and software costs.
    Improved performance: Sangfor HCI is a high-performance HCI solution that can help customers improve the performance of their AIX DB2 environments.
    Increased scalability: Sangfor HCI is a scalable HCI solution that can help customers grow their AIX DB2 environments as needed.
    Enhanced reliability: Sangfor HCI is a highly reliable HCI solution that can help customers improve the reliability of their AIX DB2 environments.

How to migrate AIX DB2 to Sangfor HCI:

The following is a high-level overview of the steps involved in migrating AIX DB2 to Sangfor HCI:

    Plan the migration: This includes determining the scope of the migration, assessing the risks, and developing a migration plan.
    Prepare the source environment: This includes backing up the AIX DB2 database and configuring the AIX server for migration.
    Prepare the target environment: This includes installing Sangfor HCI and configuring it for AIX DB2.
    Migrate the AIX DB2 database: This can be done using a variety of tools and methods, such as live migration or cold migration.
    Test the migrated environment: This includes testing the AIX DB2 database and applications to ensure that they are working properly.
    Cut over to the migrated environment: This involves switching from the source environment to the target environment.

I Can Help:

Change

Moderator on This Board

2
1
0

Started Topics

Followers

Follow

11
7
5

Started Topics

Followers

Follow

3
14
3

Started Topics

Followers

Follow

2
2
0

Started Topics

Followers

Follow

Board Leaders