I have encountered an issue after the machine restart the dhcp does not given ip address with in one hour. what would be the possible issue for this.







RegiBoy has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

There could be several reasons why DHCP is not giving out IP addresses after a machine restart in Sangfor NGAF. Here are some possible reasons and troubleshooting steps you can take:

1.DHCP service not running: Make sure the DHCP service is running on the NGAF device. Check the DHCP service status in the NGAF web console or command-line interface (CLI).

2.Incorrect DHCP configuration: Verify that the DHCP configuration is correct, including the IP address range, subnet mask, default gateway, and DNS server settings. Check for any typos or mistakes in the configuration.

3.IP address conflicts: Make sure there are no IP address conflicts on the network. Check for any duplicate IP addresses or misconfigured network devices.

4.Firewall settings: Check the firewall settings on the NGAF device to ensure that DHCP traffic is allowed to pass through.

5.Network connectivity issues: Check the network connectivity between the NGAF device and the DHCP server. Verify that the DHCP server is reachable and responding to requests.

6.Lease time: Check the lease time setting for the DHCP service. If the lease time is set too high, it could cause IP addresses to be unavailable for an extended period.

7.Other devices on the network: Check for any other devices on the network that may be causing issues with DHCP, such as rogue DHCP servers or misconfigured routers.


Contact Support if the problem still exsist.
Is this answer helpful?
Jhazz Lv3Posted 08 May 2023 09:58
  
Check the configuration of the DHCP server if the same
rivsy Lv5Posted 08 May 2023 09:46
  
Check your DHCP if properly configure
Taha Lv2Posted 07 May 2023 14:58
  
dhcp is  not working properly
sumran Lv2Posted 07 May 2023 14:46
  
dhcp server is not proper configured one of the possible reasons
Ghostlying Lv2Posted 04 May 2023 17:15
  
There could be several possible reasons why the DHCP service on Sangfor NGAF is not giving out IP addresses within one hour after a machine restart. Here are some things you can check:

DHCP scope configuration: Make sure that the DHCP scope is configured correctly and has enough available IP addresses to lease out. Check the subnet mask, default gateway, and DNS settings for the scope as well.

DHCP server availability: Verify that the DHCP server is running and available on the network. Check that the server's IP address is correct and reachable from the network.

Network connectivity: Ensure that the client machine can communicate with the DHCP server over the network. Check the network connectivity and firewall settings on both the client and server machines.

Lease duration: Check the lease duration settings for the DHCP scope. If the lease duration is too long, it may take longer for the DHCP server to assign IP addresses to new devices. Try reducing the lease duration to see if it improves the situation.

DHCP server logs: Check the DHCP server logs for any errors or warnings that may indicate why the server is not assigning IP addresses.

If the above steps do not resolve the issue, you may need to contact Sangfor support for further assistance.
Cecille Lv1Posted 04 May 2023 13:34
  
There is a connectivity issue in your NGAF thats why it is not able to communicate with the DHCP server to obtain IP address
letlet Lv1Posted 04 May 2023 11:41
  
Some reason:
1. IP address conflict: It is possible that there is an IP address conflict on the network. Check the DHCP logs on the firewall for any IP address conflicts and resolve them.
2. Firewall configuration issue: The firewall may be misconfigured, causing the DHCP server to fail. Check the firewall's configuration settings and ensure that they are correct.
Bojie186 Lv1Posted 04 May 2023 11:27
  
If the Sangfor NGAF firewall's DHCP server does not give out IP addresses within one hour of a machine restart, there may be several possible issues to consider for example, The DHCP server service may not be running on the firewall. Check the DHCP server status on the firewall and start it if necessary.Also, The DHCP scope may not be configured properly on the firewall. Check the DHCP scope settings on the firewall and make sure it includes the range of IP addresses that the clients need. Another thing is the DHCP lease time may be set to a very long duration, and the clients are unable to obtain new IP addresses. Try shortening the lease time on the firewall.
Pat Lv4Posted 04 May 2023 11:23
  
There could be several possible issues that may be causing DHCP to not give an IP address within one hour on your Sangfor NGAF after a machine restart.

DHCP Server Configuration: Check if the DHCP server is configured correctly. Ensure that the DHCP scope, subnet mask, lease duration, and exclusion ranges are set correctly. Make sure that the DHCP server is enabled and running.

Network Connectivity: Check if there is network connectivity between the DHCP server and the client machines. Ensure that the DHCP server can reach the client machines and vice versa. Check for any network configuration errors, such as incorrect IP addresses, subnet masks, or gateways.

DNS Configuration: Check if the DNS configuration is set up correctly. Ensure that the DNS server is running and can resolve domain names. Check if the DNS server is configured as the primary DNS server for the client machines.

Firewall Configuration: Check if the firewall is configured correctly. Ensure that the firewall rules allow DHCP traffic to pass through.

Farina Ahmed Lv5Posted 02 May 2023 18:24
  
Possible reason;
1) DHCP not properly configured
2) Connectivity issue between DHCP Server and device.
3) Improper shut down.

This issue occurs only the when the server unexpectedly shut down due to power loss. and even sometimes in this condition dhcp work but offer dhcp to some clients only, it doest not offer to all, or most of the time I noticed that it does not offer a single dhcp. And when I restart the server the issue resolves, some times after two restarts.

I Can Help:

Change

Moderator on This Board

11
7
5

Started Topics

Followers

Follow

1
3
5

Started Topics

Followers

Follow

0
4
5

Started Topics

Followers

Follow

67
20
3

Started Topics

Followers

Follow

3
14
3

Started Topics

Followers

Follow

1
137
3

Started Topics

Followers

Follow

Board Leaders