IAM not functioning

nobitachou Lv2Posted 2022-Oct-16 07:10

Last edited by nobitachou 18 Oct 2022 16:25.

If I were to bring up the IAM, all the PCs, Laptop, Mobile phones, Servers don't have internet and also I can't ping them even on local Lan.
Also when accessing all our switch is very slow and takes a lot of time to input a little command.

RegiBoy has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Check if there were broadcast storm when you bring up the IAG. You must not plugged the LAN and WAN on the same switch.
Is this answer helpful?
Exlegend Posted 2025-May-04 11:58
  
Thanks for sharing dear
Jdc Lv2Posted 2022-Oct-25 11:53
  

Please check if properly configure specially on the gateway address
MISMDS Lv3Posted 2022-Oct-21 11:28
  
Check if there were loop packets
MISMIS Lv3Posted 2022-Oct-21 11:20
  
Contact support team for this
Fuji12 Lv3Posted 2022-Oct-21 11:16
  
root of issue is a routing between your network elements
Jigen87 Posted 2022-Oct-21 11:11
  
please chec  gateway address
LucyHeart Lv3Posted 2022-Oct-21 11:09
  
Check if there were broadcast storm
soneosansan Posted 2022-Oct-21 11:04
  
You must not plugged the LAN and WAN on the same switch.
grayice499 Lv2Posted 2022-Oct-20 17:00
  
configure specially on the gateway address
Happpy Posted 2022-Oct-20 16:56
  
Check if there were broadcast storm when you bring up the IAG

I Can Help:

Change

Moderator on This Board

1007
208
99

Started Topics

Followers

Follow

Board Leaders