DHCP Problem

damulagski Lv3Posted 15 Oct 2022 21:17

I have multiple vlans and my DHCP server is the IAM and my problem is end devices can't get IP Address

Faisal P has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Enable a LAN Port (layer 3) --> Create Sub-interface using the LAN port, set ip address and set vlan number. -- > Go to DHCP settings, select corresponding sub-interfaces, and set DHCP configurations like gateway ip, dhcp ip range
Is this answer helpful?
Jdc Lv2Posted 25 Oct 2022 11:52
  

No as long as you give them different IP address and avoid conflict IP
MISMDS Lv3Posted 21 Oct 2022 11:27
  
Routing is the root cause
MISMIS Lv3Posted 21 Oct 2022 11:19
  
should you check the routing and the gateway addresses
MISMIS Lv3Posted 21 Oct 2022 11:19
  
Should you check the routing and the gateway addresses
Fuji12 Lv3Posted 21 Oct 2022 11:15
  
set ip address and set vlan number. -- > Go to DHCP settings, select corresponding sub-interfaces, and set DHCP configurations like gateway ip, dhcp ip range
Jigen87 Lv3Posted 21 Oct 2022 11:12
  
Configure DHCP pool first
LucyHeart Lv3Posted 21 Oct 2022 11:08
  
there must be an iphelper element in the network topology
soneosansan Lv3Posted 21 Oct 2022 11:05
  
If a dhcp server vlan crosses a dhcp client vlan border, the network topology must include an iphelper element.
nobitachou Lv2Posted 21 Oct 2022 11:01
  
Create a sub interface in each vlans
grayice499 Lv2Posted 20 Oct 2022 16:59
  
there must be an iphelper element in the network topology

I Can Help:

Change

Moderator on This Board

1
3
5

Started Topics

Followers

Follow

Board Leaders