1/4
#Tech Tips# 5 Reasons Why a Sangfor NGAF Firewall Policy May Not Work as Expected
  

Muhammad Abid Lv3  Posted 2026-Sep-21 19:32

Creating a firewall policy is straightforward, but sometimes traffic may not work as expected even when the policy appears to be correctly configured.

Here are 5 quick checks that can help troubleshoot an NGAF firewall policy:

1. Check Policy Order / Priority
Make sure another policy above it is not matching the same traffic first.

2. Verify Source & Destination Objects

Check the source IP, destination IP, subnet, and address objects carefully. Even a small mismatch can prevent the expected policy from matching.

3. Check Service & Port Configuration
Verify that the required TCP/UDP ports are included in the policy. Some applications may also require additional ports.

4. Verify NAT Configuration
For Internet-bound traffic, confirm that the required SNAT/NAT configuration is correctly applied.

5. Check Traffic Logs
Traffic logs are one of the fastest ways to troubleshoot. They can help determine whether traffic was allowed, denied, or matched by a different policy.

Quick Tips:
Before changing multiple settings, first identify which firewall policy is actually processing the traffic. This can significantly reduce troubleshooting time.

Question for the community:
What is the most common NGAF firewall policy issue you have encountered in your environment?

Share your experience and troubleshooting tips in the comments.

#Sangfor #NGAF #Firewall #NetworkSecurity #TechTips #NetworkTroubleshooting

Like this topic? Like it or reward the author.

Creating a topic earns you 5 coins. A featured or excellent topic earns you more coins. What is Coin?

Enter your mobile phone number and company name for better service. Go

Newbie527324 Lv1  Posted 2026-Oct-20 13:27
  
Thanks for sharing!
Sheraz885677 Lv1  Posted 2026-Oct-16 17:18
  

Thanks to share!
xonivre Lv1  Posted 2026-Sep-23 13:08
  
thank you for the brilliant checklist
Prosi Lv4  Posted 2026-Sep-22 19:54
  
Hi,

Troubleshooting:
Client → NGAF policy matching → NAT → Routing → Security inspection → Destination → Return traffic

If traffic is interrupted at any stage, the relevant configuration must be checked.

A firewall policy set to *Allow* does not automatically guarantee that the application will function. Routing, NAT, security inspection, policy priority, and return traffic must all be configured correctly.
Humayun Ahmed Lv4  Posted 2026-Sep-22 16:44
  
Thanks to share!
Arsalan Israr Lv2  Posted 2026-Sep-22 16:01
  
Great breakdown 1 (Policy Order) is underrated. I've seen admins spend an hour re-checking source destination objects when the real issue was a catch-all rule sitting above the new one, quietly matching first.
My go-to habit: whenever a policy 'isn't working, I check Traffic Logs before touching any config. The matched policy field usually tells the whole story in seconds way faster than manually re-verifying every field one by one
Newbie006434 Lv2  Posted 2026-Sep-22 11:07
  
Thanks for sharing this great troubleshooting guide!

This is a very common issue with NGAF. In most cases I have seen, the problem is the policy order or an incorrect zone selection. Checking the traffic log first is the best approach as it clearly shows which policy is actually matching the traffic. Verifying the source/destination objects and schedule is also a very good point.

Really appreciate you sharing these practical tips with the community.
Newbie380273 Lv2  Posted 2026-Sep-21 23:43
  
Great sharing, thanks! Very practical checklist. The tip about checking policy order/priority first and then verifying traffic logs is really valuable. I have also faced issues mostly due to source/destination object mismatch. This quick 5-step approach will save a lot of troubleshooting time. Thanks for the post!