1/3
VDC client WOL - which tecnology is used?

Simone Eusebi Lv1  Posted 2026-Jul-28 15:16

Hi everybody,
we have finally in production a room in our University with Sangfor VDC.
Our clients are aDesk-STD-320 and they are connected in a network vlan different from the network used by VDC.
When we try to "power on remotely" the clients, they won't wake up.
A popup appear before sending the signal to poweron:
"Would you like to proceed?
The IP addresses of selected clients and the VDC IP address must be in the same subnet. The following clients cannot be powered on remotely: STD-100, AIR-100, EDU-50, EDU-100, STD-200H, AIR-200H, PRO-200H"

Is it really working only if same subnet is used by vdc and clients?

Does anyone know which technology is implemented to send the magic packet over the network for powering on the clients?

Thanks
Best regards

Simone

Zonger has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

I Can Help:

Change

Board Leaders

George ...

Weekly Sharers