Individual hardware details of each node in a Sangfor HCI cluster

Humayun Ahmed Lv3Posted Oct-27-2025 13:40

how can i get Individual hardware details of each node in a Sangfor HCI cluster?

Newbie517762 has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

HiHi,

To get the individual hardware details of each node in a Sangfor HCI cluster, you can log in to the HCI console, go to [Nodes], and click on the host name of the node you want to check. This will take you to the [Summary] or details interface where you can view hardware information such as CPU model, number of cores, number of CPUs, memory, and other hardware configurations. This interface also shows CPU and memory consumed by network forwarding. This method allows you to see detailed hardware information for each node individually.

Is this answer helpful?
Sheikh_Shani Lv2Posted Oct-27-2025 18:13
  
To get individual hardware details of each node in a Sangfor HCI cluster, you can refer to the official Sangfor documentation or contact their support team for the most accurate and up-to-date information. However, based on available data sheets, here are some general hardware specifications for Sangfor HCI nodes:
CPU: Sangfor HCI nodes can be equipped with Intel Xeon processors, such as the Silver 4210R or Gold 6226R, with varying core counts and thread counts.
Memory: The nodes support DDR4 memory with frequencies of 2933 MHz, and the maximum memory capacity varies by model, up to 768GB.
Storage: Each node can have multiple disk slots, with options for SSDs (240GB to 1.9TB) and HDDs (6TB to 8TB), and support for RAID configurations.
Networking: Sangfor HCI nodes often feature multiple Gigabit Ethernet ports and may include 10GbE or higher-speed options, depending on the specific model and configuration.
Power Supply: The power supply units are typically redundant, with options for 800W or higher power capacity.

Some specific node models and their hardware specifications include ¹:
aServer-1800:
    CPU: 1 x Intel Xeon Silver 4210R
    Memory: 64GB (2x32GB) DDR4
    Storage: 1 x 128GB SSD (OS disk)
a Server-2100:
    CPU: 2 x Intel Xeon Silver 4210R
    Memory: 128GB (4x32GB) DDR4
    Storage: 1 x 128GB SSD (OS disk)
a Server-2305:
    CPU: 2 x Intel Xeon Gold 5220R
    Memory: 128GB (4x32GB) DDR4
    Storage: 2 x 128GB SSD (OS disks)
Jm Ramos Lv1Posted Oct-27-2025 13:59
  
Navigate to the Node Dashboard:

Go to Cluster Management or Node Management.
Select the specific node you want to inspect.


View Hardware Information:

Each node dashboard typically displays:

CPU model and core count
RAM size and usage
Disk type, capacity, and health
Network interface details
System temperature and power status (if supported)

I Can Help:

Change

Board Leaders

NyxZale...

Weekly Sharers

Newbie5...

Weekly Questioners