Request for Compliance Documents for Athena NGFW

Newbie091303 Lv1Posted Sep-01-2025 00:04

Dear all,

In order to import the Athena NGFW (Next-Generation Firewall) into Argentina, it is mandatory to comply with the local requirements for Electrical Safety.

According to Argentine regulations, these requirements follow the new conformity assessment methods (Systems 1b, 2, 3, 4, or 5 of the ISO/IEC 17067 standard).

To demonstrate compliance, we must present to the National Customs Authority one of the following documents:

a) Test reports showing that Athena NGFW complies with the above-mentioned standards, issued by foreign laboratories accredited by a member of ILAC, within the corresponding scope.

b) Test reports already performed in factory laboratories or in technological centers associated with the factory. In this case, the laboratories or centers must comply with ISO/IEC 17025.

My questions are:

Would it be possible to provide us with documents like those described in points (a) or (b)?
(I believe such documents may already exist, since they are usually required in other countries as well.)

Additionally, could you provide any certification showing that the Athena NGFW complies with the following standards?

EN IEC 62368-1

EN IEC 60065

EN IEC 60950-1

Thank you very much in advance for your kind support.

Best regards,
Alberto

Newbie517762 has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

I believe Sangfor does not publish compliance certificates (EN IEC 62368-1, IEC 60065, IEC 60950-1, etc.) publicly on the website or community portal. These documents (test reports, safety certificates, or Declaration of Conformity) are only available upon request through official Sangfor channels because they are considered sensitive compliance/technical documents.  For importation into Argentina, Sangfor can provide test reports from certified labs or factory reports under ISO/IEC 17025, depending on what was used for CE or CCC certifications.

Opening a Sangfor support ticket is the best to forward on this.
Is this answer helpful?
Newbie517762 Lv5Posted Sep-01-2025 10:02
  
HiHi,

Please contact your local Sangfor representative or Sangfor Technical Support at Tech.Support@sangfor.com for assistance.

I Can Help:

Change

Moderator on This Board

1
148
3

Started Topics

Followers

Follow

917
183
94

Started Topics

Followers

Follow

Board Leaders