#Troubleshooting#Windows 11 Installation on HCI V6.9.1
  

Mr Umair Khan Lv1Posted 08 Aug 2024 16:00

Product Version Product:
  
HCI and SCP Version : 6.9.1
  
Issue Description:
  
We were facing the issue to install Windows 11 Operating System in Sangfor HCI, we were trying to Install Windows 11 as per Routine Process, But Could Not Succeeded.  
   
Handling Process:
After Some Troubleshoot we found the solution. Actually, creating a Windows 11 Virtual Machine needs to meet some configurational requirements. While Windows 11 Installation, Virtual machine automatically checked its prerequisites. Like if Virtual Machine has 2 or more virtual processors, 4 GB or More than 4 GB Memory with enabled Secure Boot and virtual TPM. If it can't meet the requirement, Error will be interrupted during Installation Like: "This PC can't run Windows 11" on Sangfor HCI.

Solution:
  
That After Made Changes in Registry, We can resolve the Issue.
1st Step: Once This Error Interrupted. Press Shift + F10.
After Press Shift + F10 Command Prompt Screen will be Appeared and type regedit after X:\Sources. Then hit Enter button on the keyboard.
  
  
2nd Step: Extend HKEY_LOCAL_MACHINE folder and SYSTEM folder. Right-click on Setup folder, and select New to create a new Key.
  
  
3rd Step: Name the new key as LabConfig. Enter Labconfig folder and right-click on the blank to create a new DWORD(32-bit) Value.
  
  
4th Step: Name the DWORD(32-bit) Value as BypassCPUCheck.
  
  
5th Step: Right-click on BypassCPUCheck and choose Modify.
  
  
6th Step: Adjust the Value data of BypassCPUCheck to 1 and click on OK.
  
  
7th Step: Right-click on the blank and create more 3 new DWORD(32-bit) Value files one by one. Name them as BypassTPMCheck, BypassRAMCheck, BypassSecureBootCheck and adjust their Value data into 1 respectively. Then quit this Windows.
  
  
8th Step: Close the Registry Dialogue Box, Windows Command Prompt and Windows Setup Box to go on Windows Setup.
  
  
9th Step: Click Install now and Now it will successfully Continue Installing Windows 11 HCI without the error "this PC Can't Run Windows 11" on HCI.

----------------------------------------------------------------------------------------------------------------------------------------------

Your comments and thoughts about this article are warmly welcome. You can download the attachment just in case.



#Troubleshooting#Windows 11 Installation on HCI V6.9.1_written by Umair Khan.pdf

505.56 KB, Downloads: 49

Like this topic? Like it or reward the author.

Creating a topic earns you 5 coins. A featured or excellent topic earns you more coins. What is Coin?

Enter your mobile phone number and company name for better service. Go

Newbie650977 Lv1Posted 20 Aug 2024 09:29
  
Thanks for sharing
Sheikh_Shani Lv2Posted 08 Aug 2024 18:18
  
Thanks for sharing
vesogi7900 Lv2Posted 08 Aug 2024 17:19
  
Thanks to share
Enrico Vanzetto Lv4Posted 08 Aug 2024 16:10
  
Hi, thanks for sharing