where to configure ddns in firewall

Newbie183487 Lv1Posted 25 Apr 2024 20:17

what are the steps to configure ddns in sangfor firewall

Newbie517762 has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

HiHi,

Please find the attached file for your reference.
NGAF 8.0.47_ DDNS.pdf (335.75 KB, Downloads: 283)

For further details, pls consult the NGAF 8.0.47 User Manual.
Is this answer helpful?
hafizzy Lv1Posted 27 Aug 2024 17:45
  
Hi,

all the answer given refer to NGAF...please refer picture below for network secure.. there is no option for DDNS under DNS tab.

Screenshot 2024-08-27 174434.png (23.3 KB, Downloads: 19)

Screenshot 2024-08-27 174434.png
Prosi Lv3Posted 06 May 2024 11:43
  
Migrate configuration Juniper Firewall to Sangfor NGAF · NGAF Routing Protocols · Geo Location Filtering · Client VPN · NGAF Default Gateway
Farina Ahmed Lv5Posted 03 May 2024 15:57
  
Always follow their user guide for configuration. It will show all requirements and steps involved in the configuration of any product.
Farina Ahmed Lv5Posted 03 May 2024 15:53
  
Always follow their user guide for configuration. It will show all requirements and steps involved in the configuration of any product.
Newbie290036 Posted 02 May 2024 20:42
  
To configure DDNS (Dynamic DNS) in a Sangfor Firewall:
1. Log in to the Sangfor Firewall's web management interface.
2. Navigate to the "System" menu and select "Dynamic DNS".
3. Click "Add" to create a new DDNS configuration.
4. Fill in the required details, including the DDNS service provider, server address, username, and password.
5. Configure DDNS records for your devices, specifying their IP addresses and domain names.
6. Save the configuration, and the Sangfor Firewall will automatically update the DDNS records as IP addresses change.
Tayyab0101 Lv2Posted 02 May 2024 13:36
  
go to network setting and then DNS -> DDNS ->click Add to add a new policy. save the changes.
pmateus Lv2Posted 30 Apr 2024 22:18
  
Hi,

Please check the follwoing document:

NGAF 8.0.47_ DDNS.pdf

335.75 KB, Downloads: 219

NGAF 8.0.47_ DDNS.pdf

pmateus Lv2Posted 30 Apr 2024 21:39
  
Hi,
Please check the following document:

https://community.sangfor.com/fo ... 8MzI2MDF8MTAwNjk%3D
Zonger Lv5Posted 30 Apr 2024 20:58
  
To configure Dynamic DNS (DDNS) in a Sangfor firewall, please follow below steps:

1. Access Firewall Management Interface: Log in to the management interface of your Sangfor firewall using a web browser.

2. Navigate to DDNS Configuration: Locate the section or menu within the firewall interface that deals with network or WAN settings. Look for options related to DDNS configuration.

3. Enable DDNS: Find the option to enable DDNS services on the firewall. This usually involves toggling a switch or checkbox to enable DDNS functionality.

4. Enter DDNS Account Information: Provide the necessary DDNS account information, including the DDNS service provider (e.g., No-IP, DynDNS), your account username, password, and the hostname or domain you want to associate with your dynamic IP address.

5. Configure Update Frequency: Some DDNS services allow you to configure how frequently the firewall should update its IP address with the DDNS provider. Set the update frequency according to your preferences or the requirements of your network.

6. Save and Apply Settings: After entering the DDNS account information and configuring the update frequency, save the settings and apply them to activate DDNS on your Sangfor firewall.

7. Verify Configuration: Once the configuration is saved, the firewall should start updating the DDNS service with its current IP address. Verify that the DDNS hostname or domain resolves to the correct IP address.

8. Testing and Monitoring: Test the DDNS configuration by accessing services or devices behind the firewall using the DDNS hostname or domain. Monitor the DDNS status within the firewall management interface to ensure that updates are being sent successfully to the DDNS provider.

9. Troubleshooting: If you encounter any issues with DDNS updates or connectivity, refer to the firewall documentation or contact Sangfor support for assistance in troubleshooting and resolving the problem.
jerome_itable Lv3Posted 30 Apr 2024 16:12
  
Unfortunately, Sangfor NGAF firewalls currently don't have a built-in feature for Dynamic DNS (DDNS) configuration.  Several online resources and discussions confirm this limitation  (

https://community.sangfor.com/fo ... wthread&tid=671).

Here are some alternative approaches you can consider:

    Use your Router's DDNS Functionality:  Many routers have built-in DDNS support. You can configure your DDNS service through your router's web interface instead of the Sangfor firewall.

    Third-Party DDNS Client:   You can install a dedicated DDNS client software on a device within your network that can update your DDNS service with your dynamic public IP address. There are various free and paid DDNS client options available.

    Contact Sangfor Support: While there's no current official support, you can reach out to Sangfor support to inquire about potential future updates or alternative solutions for DDNS within their firewalls.

I Can Help:

Change

Moderator on This Board

11
7
5

Started Topics

Followers

Follow

1
3
5

Started Topics

Followers

Follow

0
4
5

Started Topics

Followers

Follow

67
20
3

Started Topics

Followers

Follow

3
14
3

Started Topics

Followers

Follow

1
137
3

Started Topics

Followers

Follow

Board Leaders