This site uses cookies for functionalities and analytics. By continuing to use this site, you agree to this use. Learn more Close
Categories › Products › Internet Access Gateway (IAG) › Mirror Deployment on IAG
babeshuka Lv3  Posted 28 Aug 2023 12:10
  
If you're concerned about losing your existing bridge interfaces, consider making incremental changes. Instead of reconfiguring everything at once, try adding the mirror interface while keeping the bridge interfaces intact. This approach reduces the chances of unintended consequences.
soneosansan Lv3  Posted 28 Aug 2023 12:10
  
If your device supports it, you might consider creating a snapshot or backup image of your current configuration before making any changes. This way, you can easily revert back to the previous state if needed.
JoanaPatricia Lv2  Posted 28 Aug 2023 12:11
  
If you're unclear of how the modifications you're about to make may affect the device, you can try contacting its technical support or speaking with someone who is familiar with that model of equipment. They may offer advice that is specific to your circumstance and make sure you don't unintentionally interrupt vital services.
damulagski Lv3  Posted 28 Aug 2023 12:11
  
Using virtualization or emulation techniques, it can still be advantageous to investigate the idea of building a virtual lab environment. You may try out different settings in this way without endangering your production environment.
RegiBoy Lv5  Posted 28 Aug 2023 12:37
  
Please consult the Sangfor Technical Team for this issues to be resolve faster
Farina Ahmed Lv5  Posted 28 Aug 2023 17:48
  
You have an IAG 5000 series device with a bridge deployment on two interfaces, and you now need to configure an additional interface as a mirror interface. You're concerned that following the deployment guide again might delete your existing bridge interfaces. To address this, carefully review the deployment guide and any documentation provided by the manufacturer to understand the impact of adding a mirror interface. Prior to making changes, back up your current configuration, and if needed, contact the manufacturer's support for guidance. If possible, consider setting up a virtual lab environment to simulate changes before applying them to your production device. This cautious approach will help you avoid disruptions and better understand the implications of the changes you're making.
Imran Tahir Lv4  Posted 29 Aug 2023 01:26
  
Kindly get help with sangfor support team
Newbie142373 Lv1  Posted 01 Sep 2023 17:05
  
If you're concerned about losing your existing bridge interfaces, consider making incremental changes. Instead of reconfiguring everything at once, try adding the mirror interface while keeping the bridge interfaces intact. This approach reduces the chances of unintended consequences and network disruption. Additionally, document your existing bridge configurations thoroughly, including settings like VLANs, IP addressing, and port assignments. This documentation serves as a valuable reference in case you need to revert to the previous configuration or troubleshoot any issues that may arise during the transition. Moreover, before implementing any changes, it's a good practice to simulate the new configuration in a test environment to identify and address any potential issues proactively. This cautious approach minimizes the risk of downtime or disruptions to your network while ensuring a smoother transition to the updated setup.
Alizaan Lv2  Posted 01 Sep 2023 17:56
  
You currently have an IAG 5000 series device configured in a bridge deployment across two interfaces, and your objective is to set up an additional interface as a mirror interface. You are concerned that reconfiguring it according to the deployment guide might inadvertently remove your existing bridge interfaces. To address this concern, it is advisable to thoroughly review the deployment guide and any manufacturer-provided documentation to gain a clear understanding of how adding a mirror interface may affect your setup.

Prior to making any modifications, it is essential to create a backup of your current configuration. In case you encounter any uncertainties or complexities during the process, consider reaching out to the manufacturer's support team for expert guidance.

If feasible, think about establishing a virtual laboratory environment where you can simulate the proposed changes before implementing them on your live production device. This prudent approach will help you prevent any disruptions and allow you to gain a comprehensive understanding of the ramifications of the adjustments you intend to make.
12
Post Favorite Reply
Share

I Can Help:

Change

Moderator on This Board

fuadmahbubun
1
3
5

Started Topics

Followers

Follow

Trending Topics

Board Leaders