Cecille Lv1Posted 2023-May-04 13:28
  
Sub-interfaces allow you to divide a physical interface into multiple logical interfaces, each with its own VLAN ID, IP address, and other configuration settings. This can be useful for segregating traffic and implementing network security policies.
Ghostlying Lv2Posted 2023-May-04 17:16
  
Yes, Sangfor NGFW supports sub-interfaces (802.1q VLAN ID). You can create virtual interfaces on top of physical interfaces to segregate network traffic using VLAN IDs. This can be done through the NGFW's web interface or command-line interface (CLI).
sumran Lv2Posted 2023-May-06 13:53
  
yes you can create the sub interfaces in NGFW in sangfor
Taha Lv2Posted 2023-May-06 14:21
  


In the NGFW description, there is support for LACP, yes it is possible to create sub-interfaces (802.1q VLAN ID)
rivsy Lv5Posted 2023-May-08 09:48
  
In the Terminal configuration
inter range gigabitEthernet 1/0/23-24
channel-group 1 mode active
channel-protocol lacp
switchport mode trunk
Jhazz Lv3Posted 2023-May-08 09:59
  
Yes it is possible to support it you can create and clone the sub interface

I Can Help:

Change

Moderator on This Board

1
152
3

Started Topics

Followers

Follow

1001
208
99

Started Topics

Followers

Follow

Board Leaders