RegiBoy Lv5Posted 16 Aug 2022 14:22
  
It doesn't have IP Address configured that is why there was an error.
jpbaltazar Lv2Posted 16 Aug 2022 14:26
  
The diagram is correct. You've chosen the wrong interface to configure. Always check the interface that we are configuring when we do troubleshooting, best way to do is to make sure is everything is right do the tracing.
Farina Ahmed Lv5Posted 16 Aug 2022 16:22
  
Your IPs are Ok. As you mentioned that there was an error in management interface as you select same for LAN interface. So there was conflict in the interface. Management port can be use for initial configuration but later it is better to use another port for LAN.
naomivillamor Posted 17 Aug 2022 09:00
  
Please input Ip address first.
Newbie308427 Posted 18 Aug 2022 23:52
  
looks like lan & management have the same ip
Osama Muhammad Lv3Posted 19 Aug 2022 00:02
  
please choose correct port
Raja Azkar Lv2Posted 19 Aug 2022 01:32
  
The default gateway is the same and also all the connections
Rashley Lv2Posted 19 Aug 2022 08:56
  
The design is correct. You made the incorrect interface configuration choice. When troubleshooting, make sure to always check the interface that we are configuring. The easiest way to accomplish this is to run a trace to ensure that everything is in order.
Ashley Anne Lv2Posted 19 Aug 2022 09:04
  
Your IPs work fine. You noted that the management interface had a problem, and you chose the same for the LAN interface. The interface was thus in contradiction. Although the management port can be used for initial configuration, it is preferable to use a different port for LAN later on.
Rhebie Lv3Posted 19 Aug 2022 09:06
  
Kindly select the proper port.

I Can Help:

Change

Board Leaders