Thin Client and VDI Client Unable To Access VM

|
  • 216
  • 7

Issue Description

In this new deployment scenario, user found that thin client and VDI client both are unable to connect to the VM.

*For thin client access, it will stuck at reconnecting status for more than 1 hour.
*For VDI client, it will show "Connecting to host (10.xxx.xxx.xxx:5520) failed. Please contact administrator to check the settings of the port used for communication between client and host."

Error/Warning Information

Thin Client Error:

VDI Client Error:

Handling Process

1. Check the VMP communication interface is using ETH 0 (10.252.xxx.xxx).


2. Go to VDC platform, check VDI Options > VMP and found the VMP ip address is 192.168.xxx.xxx IP. This 192.168.xxx.xxx is the IP address of VMP node's ETH3.


3. VDC need to communicate with VMP on management interface in order to access virtual machine normally. Next, try to modify the VMP management interface IP address on VDC which is 10.252.xxx.xxx segment.


Root Cause

VDC communicate with VMP not using communication interface but a ETH 3 network card.

Solution

Modify the VMP IP address on VDC and make sure VDC can communicate with VMP management interface not other interface.
Faisal Posted 17 May 2021 05:50
  
Thank you very much for the information ...
Faisal Posted 17 May 2021 05:50
  
Nice article ...
Faisal Posted 17 May 2021 05:51
  
Great info ...
Faisal Posted 17 May 2021 05:51
  
Very informative ...
Faisal Posted 17 May 2021 05:51
  
Nice guidance ...
faizansami Lv2Posted 07 Jan 2022 17:08
  
Nice guidance
Raza Islam Lv3Posted 25 Jul 2022 16:20
  
Nice guidance.

I want to write a case
Doc ID: 4518
Author: Sangfor_Yong
Updated: 2021-04-28 11:51
Version: