Sangfor devices

Faisal Posted 27 Jul 2020 17:49

"Sangfor devices can work in two modes, Single-Arm mode and Gateway mode".
What are the advantages and disadvantages of Single-Arm mode vs. Gateway mode?

Sangfor_Siva has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

There is no advantage or disadvantage, this is for allow user to deploy VDI in different scenario according to business need.
For example Gateway Mode with Single Line is for VDI to deployed as Gateway and the external network interface is connected to ISP.


Gateway Mode with Multiple Lines is similar to above, but the environment has 2 WAN line.

Single-Arm Mode With Single Line is when VDI is to be deployed on the local area network with the firewall connected to external network thru ISP.

Single-Arm Mode With Multiple Lines is similar to above, but user has 2 WAN lines on the Firewall and wish to use both WAN IP to connect VDI from outside.

When Sangfor device is deployed in single-arm mode, the HTTPS port and HTTP port must be mapped to the Sangfor device. Otherwise, multiline selection policy will not work.
Is this answer helpful?
Sangfor_Siva Posted 27 Jul 2020 22:18
  
There is no advantage or disadvantage, this is for allow user to deploy VDI in different scenario according to business need.
For example Gateway Mode with Single Line is for VDI to deployed as Gateway and the external network interface is connected to ISP.


Gateway Mode with Multiple Lines is similar to above, but the environment has 2 WAN line.

Single-Arm Mode With Single Line is when VDI is to be deployed on the local area network with the firewall connected to external network thru ISP.

Single-Arm Mode With Multiple Lines is similar to above, but user has 2 WAN lines on the Firewall and wish to use both WAN IP to connect VDI from outside.

When Sangfor device is deployed in single-arm mode, the HTTPS port and HTTP port must be mapped to the Sangfor device. Otherwise, multiline selection policy will not work.
Faisal Posted 11 Oct 2021 12:44
  
Thank you very much for the information ...
Newbie259600 Lv2Posted 22 Oct 2021 12:51
  
Thank you very much for the information ..
Rai Lv1Posted 31 May 2023 20:01
  

Thank you very much for the information ..

I Can Help:

Change

Board Leaders