The Flow Control Policy Restricts The Network Speed From Taking Effect

|
  • 165
  • 8

Issue Description

Customer want  to limit the speed of IP which is using Thunder, they configured a flow control policy but this IP address cannot be restriced when using Thunder download.

Handling Process

1. Check the configuration. The total traffic is limited to 1.25M/s, and the actual network speed is up to 5M/s.

2. Check application and object no configuration error.

3. Try to select Target Line as all lines, then the speed can be limited.


Root Cause

There are actually three lines, but not all of the flow control policy configurations are selected, only one line is selected, so the policy actually works on only one line.

Solution

When there are actually multiple lines, you need to select multiple lines when doing the flow control policy.
Sangfor_Brando Lv5Posted 13 Feb 2020 22:25
  
Logical and Detailed.
Faisal Posted 12 Aug 2020 09:35
  
Thank you very much for the information ...
Faisal Posted 31 Oct 2020 09:43
  
Nice article ...
Faisal Posted 08 Dec 2020 07:27
  
Great Info
Muhammad Bilal Lv4Posted 19 Jan 2021 01:52
  
Thanks for sharing information
Ellechar Lv4Posted 15 Feb 2021 10:13
  
Very Nice Infooooooooooooo
Faisal Posted 10 Mar 2021 07:52
  
Very informative …
Faisal Posted 26 May 2021 08:53
  
Nice guidance ...

I want to write a case
Doc ID: 2648
Author: Newbie280530
Updated: 2019-12-24 11:47
Version: