Flow Control Does Not Take Effect Cause By User Is Not Online

|
  • 162
  • 7

Issue Description

Internal server port mapping for public to access, found that can’t access.

Handling Process

1.At first, enable bypass troubleshooting everything works fine, with bypass mode do not have log.

2.Checked internal server IP is offline, and checked the flow control configuration found that the default channel has limit 0mbps for user.

3.By using interface packet capture, found that public network request SYN, but the user is offline.

4.Checked authentication options has enable “Open auth for data flow WAN to LAN interface” causes no user online.


5.Removed the check-mark, the connection of internal server back to normal, has configured channel restriction, the connection back to normal.

Solution

Removed the “WAN-LAN open auth” function, the internal server IP can be access by public network with applied correct bandwidth policy.
Faisal Posted 25 Aug 2020 08:17
  
Thank you very much for the information ...
Faisal Posted 17 Oct 2020 10:34
  
Nice article ...
Faisal Posted 22 Dec 2020 07:19
  
Great info ...
Muhammad Bilal Lv4Posted 05 Jan 2021 00:25
  
Logical  and detailed
Ellechar Lv4Posted 19 Jan 2021 09:45
  
Very nice infoooooooooooooooooooooooooooooo
Faisal Posted 24 Mar 2021 08:07
  
Very informative …
Faisal Posted 09 Jun 2021 08:10
  
Nice guidance ...

I want to write a case
Doc ID: 2538
Author: LamWeiSiang
Updated: 2019-12-21 12:47
Version: