NGAF Failed To Build Ipsec Vpn Due To Daemon Process Starting Error

|
  • 302
  • 6

Issue Description

Failed to build IPSec VPN because of daemon process starting error.

Handling Process

  • Check interface configuration, make sure WAN attribute are checked and IPSec VPN outgoing line are checked and the line is correct.


2. If the interface have many IP(exp:192.168.1.2-192.168.1.5/255.255.255.248), please do not put range IP on first line. In another word first line fill with single IP, second line onwards can fill with IP range.

3. Check the outgoing line on Phase 1, make sure the line is available.

4. If there is only one line in the WAN, do not require to configure the VPN Multiline Options. If it is checked, then it must be equipped with one multiline.
For example, if there are multiple WAN, the VPN multiline configuration need to checked and configure multiple lines, the multiline policy configuration interface will activated.

5. VPN interface need to be configured.

Root Cause

The outgoing line on Phase 1 not match with the outgoing line on WAN interface. In another word the outgoing line on phase 1 does not exist.

Solution

Change the outgoing line on Phase 1 to the line that configured on WAN interface or if you have multiple lines, choose the available line.
Faisal Posted 22 Aug 2020 06:59
  
Thank you very much for the information ...
Faisal Posted 21 Oct 2020 08:43
  
Nice article ...
Faisal Posted 19 Dec 2020 10:45
  
Great info ...
Ellechar Lv4Posted 25 Jan 2021 16:42
  
Very nice infoooooooooooooooooooooooooooooo
Faisal Posted 21 Mar 2021 07:59
  
Very informative …
Faisal Posted 06 Jun 2021 07:25
  
Nice guidance ...

I want to write a case
Doc ID: 2479
Author: CTI Jimy
Updated: 2019-12-22 16:41
Version: