Bandwidth Control Fail

|
  • 150
  • 7

Issue Description

The WANO deploy as gateway mode. The WAN port has bandwidth of 500 Mbps. The bandwidth control policy for configuring the Internet is limited to 40 Mbps. However, when uses the speed test tool to test the internet speed still 500 Mbps.

Handling Process

1. Check the bandwidth control policy configuration of the WANO. There is no problem with the configuration.

Path: Bandwidth Mgt > Bandwidth Control > Channel Configuration
2.Check and confirm that the traffic have pass through our WANO
3.Found out that the Users IP have inside the Excluded IP.

4.After delete the IP from excluded IP then the Bandwidth control is working

Root Cause

Because the user IP is inside the Excluded IP, So the Bandwidth Management will not affect the IP which is inside the Excluded IP range

Solution

Delete it from Excluded IP then the Bandwidth Management policy can success match the user.
bramtorvalds Lv4Posted 23 Mar 2020 10:20
  
helpful guidance
Faisal Posted 26 Aug 2020 08:16
  
Thank you very much for the information ...
Faisal Posted 16 Oct 2020 09:35
  
Nice article ...
Faisal Posted 23 Dec 2020 07:54
  
Great info ...
Ellechar Lv4Posted 19 Jan 2021 09:39
  
Very nice infoooooooooooooooooooooooooooooo
Faisal Posted 24 Mar 2021 10:21
  
Very informative …
Faisal Posted 09 Jun 2021 08:17
  
Nice guidance ...

I want to write a case
Doc ID: 2416
Author: CTI TF
Updated: 2019-12-23 16:26
Version: