Tunnel Route Add Failed: The Branch User Name Is Same As The VPN Connection User Name.

|
  • 267
  • 9

Issue Description

Requirement is to implement branch to branch access. When configuring the tunnel route on the branch, it prompts “No destination route user is available”.

Handling Process

1. When configuring the tunnel route in the console to implement branch access, error message prompts: “No destination route user is available. Please refer to Tips and configure the user.”, as shown in the following figure.
Path: Sangfor VPN > Tunnel Route
2. View VPN Connection had configured correspond configuration, as shown below.
Path: Sangfor VPN > VPN Connections
3. Check that the same user exists in the Local Users. The device cannot recognize the user when having two same users exist, the tunnel route user cannot be selected.
Path: Sangfor VPN > Local Users
4. After deleted the same Local Users, the tunnel route can be successfully configured.

Root Cause

The User cannot be identified when the device Local Users and the VPN Connection have the same user name. The destination route user in Tunnel Route unable to be selected.

Solution

Delete local duplicate user and create new user with different name.
Bewok Lv3Posted 21 Jan 2020 16:51
  
thank you for share
abah Lv2Posted 24 Feb 2020 23:53
  
thanks for share
Muhammad Bilal Lv4Posted 13 Aug 2020 19:51
  
Thanks for sharing info
Faisal Posted 27 Aug 2020 07:32
  
Thank you very much for the information ...
Faisal Posted 14 Oct 2020 09:52
  
Nice article ...
Faisal Posted 25 Dec 2020 09:42
  
Great info ...
Faisal Posted 31 Dec 2020 07:06
  
Very informative
Ellechar Lv4Posted 15 Jan 2021 09:16
  
Very nice infoooooooooooooooooooooooo
Faisal Posted 11 Jun 2021 08:39
  
Nice guidance ...

I want to write a case
Doc ID: 2380
Author: CTI TF
Updated: 2019-12-20 16:10
Version: