1/4
[Sangfor EPP] - Install Failed

victormeidy Lv2  Posted 2026-Sep-25 18:19

Hi All,

I would like to ask for solution to install EPP on Windows 10 with 4GB RAM, was there any way to bypass this issue?

Newbie380273 has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go


Hello,

For Sangfor Athena EPP (Endpoint Secure), the minimum hardware requirement is 8GB RAM. On a Windows 10 with 4GB RAM, the installer will block the installation by design to ensure performance.

There is no official bypass method for this check. Even if you force install, the endpoint will be very slow and protection features may not work properly.

Recommendations:
1. Upgrade RAM to at least 8GB (recommended).
2. Check if you are installing the full EPP agent. Sometimes Sangfor provides a lightweight agent / EDR agent for low-spec machines. Please confirm with Sangfor support.
3. Make sure Windows 10 is updated to latest patch and you have enough disk space.

For business use, please follow the official hardware requirements.

Thank you.
Is this answer helpful?
Newbie380273 Lv2  Posted 2026-Sep-25 19:37
  

Hello,

For Sangfor Athena EPP (Endpoint Secure), the minimum hardware requirement is 8GB RAM. On a Windows 10 with 4GB RAM, the installer will block the installation by design to ensure performance.

There is no official bypass method for this check. Even if you force install, the endpoint will be very slow and protection features may not work properly.

Recommendations:
1. Upgrade RAM to at least 8GB (recommended).
2. Check if you are installing the full EPP agent. Sometimes Sangfor provides a lightweight agent / EDR agent for low-spec machines. Please confirm with Sangfor support.
3. Make sure Windows 10 is updated to latest patch and you have enough disk space.

For business use, please follow the official hardware requirements.

Thank you.
Newbie006434 Lv2  Posted 2026-Sep-25 19:40
  
Hi, Sangfor EPP requires minimum 8GB RAM for Windows 10 as per official specs, so 4GB will cause install failed. There is no bypass for this check. Please upgrade RAM or you can try the lightweight version if available for low-end machines, otherwise check system requirements in the datasheet.
Muhammad Abid Lv3  Posted 2026-Sep-25 20:59
  
Yes. If you mean Sangfor Athena EPP / Endpoint Secure Agent, 4 GB RAM is actually the documented minimum for the agent, so there should not be a need to bypass the RAM check. Sangfor's current deployment guidance lists:

CPU: 4 cores minimum
RAM: 4 GB minimum
Free disk: 5 GB minimum
Recommended: 6 cores / 8 GB RAM / 5 GB disk

However, on the minimum 4 GB specification, Sangfor notes that the Gene Analytic Engine cannot be used initially and must be installed later.

If installation is still refusing to install

I would not recommend bypassing the installer RAM check or modifying the installer, because this can result in an unsupported agent installation.

Check these items instead:

Confirm Windows 10 is a supported edition/build for your EPP version. Windows 10 is listed as supported by Sangfor Endpoint Secure.
Confirm the machine has 4 GB physical RAM, not just virtual memory.
Make sure at least 5 GB free disk space is available.
Remove any previous/other antivirus completely; Sangfor community guidance specifically identifies remnants of previous antivirus software as a possible cause of agent installation failures.
Download the agent directly from EPP Manager → System → Agent Deployment → Agent Download and don't rename the installer.
If the installer specifically reports “RAM insufficient” despite having 4 GB, collect the installer/log information and raise it with Sangfor Support, because that would suggest a version-specific requirement or detection issue.

If you give me the exact EPP version (for example 6.0.4R4) and the exact error screenshot/message, I can check the specific requirement and tell you what to do.
Prosi Lv4  Posted 2026-Sep-28 21:38
  
Hi, I would not recommend bypassing the requirement by modifying the installer or disabling the memory check, because it could result in an unsupported configuration or unstable endpoint protection.
Korchai Lv2  Posted 2026-Sep-30 01:00
  
Hello, I would advise against circumventing the requirement by changing the installer or turning off the RAM check, since this could lead to an unstable endpoint protection system or an unsupported configuration.
Newbie104053 Lv1  Posted 2026-Sep-30 16:27
  
You could try checking the EPP system requirements first, as 4GB RAM may be the limitation. If the installer is blocking the setup, running it as administrator or using an older compatible version might help.

I Can Help:

Change

Moderator on This Board

2
1
0

Started Topics

Followers

Follow

1
1
0

Started Topics

Followers

Follow

1190
263
101

Started Topics

Followers

Follow

Trending Topics

Board Leaders