aStore-2100 PDF Manual

Newbie014330 Lv1Posted Jul-07-2025 14:11

I can't find where to download aServer-2100 pdf manual
I wanna reset lost password
Can I do that without lost config
tq

Sangfor Jojo has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Hi, to reset a lost password for the aServer-2100 without losing configuration, you can follow these steps:

1. Prepare a USB Drive:
- Format the USB drive to FAT32.
- Create a blank text file named `reset-password.txt` and place it in the root directory of the USB drive.

2. Insert the USB Drive:
- Insert the USB drive into the USB port of the aServer-2100.

3. Access the Console:
- Connect a monitor or access the server via IPMI address.
- Enter the console interface.

4. Reset Password:
- Look for the option to reset the password. This process should not affect your existing configurations.

5. Check Recovery:
- After the operation, check if the password has been reset successfully. If the process fails, you may need to retry.

Important Notes:
- Ensure that you do not restart the device during the password reset process to avoid losing configurations.
- If you encounter issues, consider reaching out to technical support for assistance.

----------------------------------------------------------------------------------------------------------------------
If you think my answer works, it would be kind of you to mark it as the "Best Answer" to acknowledge the contributor and help others with similar questions find the solution quickly. To do this, simply click the "Accept" button on the most helpful reply.

Is this answer helpful?
Sangfor Jojo Lv5Posted Jul-11-2025 11:13
  
Hi, to reset a lost password for the aServer-2100 without losing configuration, you can follow these steps:

1. Prepare a USB Drive:
- Format the USB drive to FAT32.
- Create a blank text file named `reset-password.txt` and place it in the root directory of the USB drive.

2. Insert the USB Drive:
- Insert the USB drive into the USB port of the aServer-2100.

3. Access the Console:
- Connect a monitor or access the server via IPMI address.
- Enter the console interface.

4. Reset Password:
- Look for the option to reset the password. This process should not affect your existing configurations.

5. Check Recovery:
- After the operation, check if the password has been reset successfully. If the process fails, you may need to retry.

Important Notes:
- Ensure that you do not restart the device during the password reset process to avoid losing configurations.
- If you encounter issues, consider reaching out to technical support for assistance.

----------------------------------------------------------------------------------------------------------------------
If you think my answer works, it would be kind of you to mark it as the "Best Answer" to acknowledge the contributor and help others with similar questions find the solution quickly. To do this, simply click the "Accept" button on the most helpful reply.

I Can Help:

Change

Board Leaders

NyxZale...

Weekly Sharers

Newbie5...

Weekly Questioners