Sangfor Community»Categories Cloud & Infrastructure Hyper Converged Infrastructure (HCI) uses temporary ip in first setting and replaces it w ...

uses temporary ip in first setting and replaces it when it will be use

views: 10035 | comments: 16 | added to Favorites 0
Lights on | 提示:支持键盘翻页<-左 右->
    组图打开中,请稍候......
Created: Dec-27-2022 12:12

Summary:

I just finished installing a new Sangfor HCI, if I want to set the cluster setting, add nodes and other settings using a temporary ip first, then when it will be used in data center and there is alrea ...

Reply

CyberDaeng Posted Jan-07-2023 11:35
Its do able, but my suggestion is to do the configuration directly with production IPs. Cause changing it, you will need to redo the network
jetjetd Posted Jan-04-2023 14:10
my recommendation is to have a plan of your IP first to avoid unnecessary changes if your set up is done already to avoid inconvenience.
Josepina31 Posted Jan-03-2023 20:31
it is not recommended.
RobertonY Posted Jan-03-2023 20:25
Yes you can use you temporary IP
Naomi Posted Jan-03-2023 20:18
Yes it is possible.
MarioC Posted Jan-03-2023 20:17
While change the IP, it is recommended by the sequence below (in condition of you have 2 nodes) for easier configuration.
Lilia Posted Jan-03-2023 20:07
yes it is not impossible.
Cesar Posted Jan-03-2023 20:01
the whole configuration that you set will be apply after you reset.
CptArmando Posted Jan-03-2023 19:55
yes it is possible but not recommended.
Farina Ahmed Posted Jan-03-2023 18:16
Not recommended but possible yes.
Jhazz Posted Dec-27-2022 20:53
Yes it can be configure that way but it is much recommended to configure that IP while on connected to the network to lessen the work