Sangfor Community»Categories Products Internet Access Gateway (IAG) Make Forward IP Public with port

Make Forward IP Public with port

views: 4519 | comments: 7 | added to Favorites 0
Lights on | 提示:支持键盘翻页<-左 右->
    组图打开中,请稍候......
Created: 2022-May-29 08:53

Summary:

I use Public IP to setup Sangfor on the WAN so I can access it anywhere. and I try to forward with a Private IP from Sangfor which can be accessed via a Public IP. whether the way I did is correct or ...

Reply

ArsalanAli Posted 2022-Jun-04 18:25
Configure the policy , to allow this LAN IP
jetjetd Posted 2022-Jun-03 18:43
I am thinking you are testing it within the network. Can you try accessing it outside of your network since this is public IP already or you can let your colleague try accessing it from their home instead.
regidorreyes Posted 2022-Jun-03 18:39

The configuration/setup is right and try port 80 or 443
rivsy Posted 2022-May-30 11:51
Your configuration/setup is correct. Try to test your first configuration before deploying in the end-user
Faisal P Posted 2022-May-30 10:40
The way you did is correct
Darjo Posted 2022-May-30 00:40
which deployment of sangfor u used, route mode or bridge?
sekyu Posted 2022-May-29 19:50
correct!!!