Sangfor Community»Categories Products aCloud (HCI) Please Help i can't cancel Task

Please Help i can't cancel Task

views: 5885 | comments: 6 | added to Favorites 0
Lights on | 提示:支持键盘翻页<-左 右->
    组图打开中,请稍候......
Created: 11 Sep 2019 12:06

Summary:

Dear Support I want to Update Firmware On HCI V. 5.8.7. But I have Some Problem On Process. this message " Some virtual storage task is running. Please wait until it is completed. and then try again. ...

Reply

regidorreyes Posted 03 Jun 2022 19:07
You must let it finish the virtual storage task. Just be patient and if the disk has a problem, it will notify that events.
jetjetd Posted 03 Jun 2022 19:00
Can you let finish the virtual storage task? If it takes very long already maybe there is some issue with the disks itself.
rivsy Posted 30 May 2022 11:54
It is recommended when upgrading firmware that you update it 1 version higher not 2 to 3 version higher (example if your firmware is version 6, then you want to upgrade to version 8, you must upgrade to version 7 first before going to version 8).  

And check the following condition if meet:
1. Check if the upgrade license is valid
2. Check if the NGAF deployed in HA (High Availability mode) is disabled (enable this after upgrade)
3. Check if the custom patch or KB patch installed on the NGAF
4. Check if the NGAF hardware can support the firmware
5. Check in the Sync Options if the synchronization is disable
Faisal P Posted 30 May 2022 10:53
You required to download Sangfor Firmware update to proceed
ITD_Mitch Posted 25 Sep 2019 22:34
Hi.. is it solved already?
OMO Posted 24 Sep 2019 11:34
please wait. because it is adjusting the data on virtual storage . If very long Let the disk check may be broken.
I have encountered this problem.  ^^