default standard and additional network ports of Sangfor IAG
Hi everyone,I'm currently setting up a firewall for a network that uses Sangfor IAG. I've gone through the documentation but haven't been able to find a comprehensive list of the default ports that Sangfor IAG uses, both standard and any additional ones that might be necessary for full functionality. Does anyone know which ports are typically used by Sangfor IAG, or where I might find this information? Any help would be greatly appreciated.
Thank you! try port + 1521 or open a case with sangfor. Sangfor IAG typically uses standard ports such as 80 for HTTP and 443 for HTTPS. Below are some ports commonly associated with Sangfor IAG:
- HTTP/HTTPS (Web Access):
Port 80 (HTTP): Default port for unencrypted web traffic.
Port 443 (HTTPS): Default port for encrypted web traffic.
- Portal Authentication:
Port 8443: Commonly used for portal authentication.
SSL VPN:
Port 8443 (or other configured port): Used for SSL VPN connections.
- Administrative Access:
Port 4433 (or other configured port): Used for administrative access to the Sangfor IAG interface.
- LDAP/AD Integration:
Port 389 (LDAP): Used for LDAP integration.
Port 636 (LDAPS): Used for secure LDAP integration.
- RADIUS Authentication:
Port 1812 (RADIUS): Used for RADIUS authentication.
- ICMP:
ICMP Echo Request/Reply (Ping): ICMP traffic may be relevant for network troubleshooting. ICMP
Port 1812
Port 389 (LDAP)
Port 4433
Port 80
Port 443 As the leading vendor for Network Management, Sangfor IAG has been highlighted in the SWG Gartner ... USB ports. 3. Line Interface. 4. LED
Hi, it depends about how and what you configure on Sangfor IAG.
When you configutr Sangfor IAG for first time, the ports used are:
tcp 4433 for administrative management
tcp 8443 for portal authentication
tcp 80 and tcp 443 for updates Sangfor IAG Default Ports:
Standard Ports:
HTTPS: 443
HTTP: 80
LDAP: 389
LDAPS: 636
RADIUS: 1812
TACACS+: 49
Additional Ports for Specific Functionalities:
IAG Management Console: 8080
IAG Web Portal: 8443
IAG Mobile App: 443 (HTTPS)
IAG Terminal Server: 3389
IAG RDP Gateway: 443 (HTTPS) HiHi,
Sangfor IAG uses a set of default ports for communication. The following table lists the default ports used by Sangfor IAG: s always best to refer to the official documentation provided by Sangfor for their IAG product. Check the user manuals, deployment guides, or any documents related to network configuration. Sometimes, specific port information is included in these documents.
page:
[1]
2